Uninstalling F-Secure Internet Gatekeeper For Linux; Backup And Restore - F-SECURE INTERNET GATEKEEPER FOR LINUX 4.01 Administrator's Manual

Command examples
To install the whole product, use this command:
# make install
To install multiple copies of the software, use this command:
# make prefix=/opt/f-secure/fsigk2 suffix=2 adminport=10012 install

4.5 Uninstalling F-Secure Internet Gatekeeper for Linux

Follow the steps below to uninstall the software. This removes the files installed on the system,
deletes the configuration settings, and shuts down the service.
Execute the following command with root privileges:
# cd /opt/f-secure/fsigk
# make uninstall
# rm -rf /opt/f-secure/fsigk
If you use the rpm package, execute the following command:
# rpm -e fsigk
If you use the deb package, execute the following command:
# dpkg –r fsigk

4.6 Backup and Restore

Follow these steps to back up and restore F-Secure Internet Gatekeeper for Linux.
To back up the product, save the contents of the following directories as needed:
/opt/f-secure/fsigk : Entire system state
/opt/f-secure/fsigk/conf : Configuration files
/opt/f-secure/fsigk/log : Log files
(Note that the settings for definition file updates are saved separately by using crontab.)
To restore the software to its previous state, restore the files and then (forcibly) reinstall the package.
For rpm package:
# rpm -Uvh --force fsigk-xxx-0.i386.rpm
For deb package:
# dpkg –r fsigk
# dpkg –i fsigk-xxx_all.deb
F-Secure Internet Gatekeeper for Linux/Administrator's Guide
16