Http Error Responses - F-SECURE INTERNET GATEKEEPER FOR LINUX 4.01 Administrator's Manual

11.6 HTTP Error Responses

The section describes errors that occur during the HTTP access. You can change the messages
which are shown to the clients. You can do this by editing the error message template file
(/opt/f-secure/fsigk/conf/template_http_error.html).
Server connection error
Description
Response code
Reason
Message
Request method length error
Description
Response code
Reason
Message
Request method character error
Description
Response code
Reason
Message
Request URL length error
Description
Response code
Reason
Message
Request URL character error
Description
Response code
Reason
Message
Request URL format error
Description
Response code
Reason
Message
Request version length error
Access to the server failed
503
Service Unavailable
Connection error message.
For connection error messages, see
", 171.
The length of the request method exceeds the limit (98 bytes)
400
Bad Request
Too long Request Method
The request method contains an invalid character (the character is under the character
code 0x20)
400
Bad Request
Illegal method character.
The length of the request URL exceeds the limit (2098 bytes)
414
Request-URI Too Long
Request-URI Too Long
The request URL contains an invalid character (the character is under the character
code 0x20)
400
Bad Request
Illegal URL character.
The request URL has an invalid format
400
Bad Request
Invalid URL format
F-Secure Internet Gatekeeper for Linux/Administrator's Guide
"Connection Error Messages
144