Installing F-Secure Internet Gatekeeper For Linux; Installing An Rpm Package - F-SECURE INTERNET GATEKEEPER FOR LINUX 4.01 Administrator's Manual

Use either the rpm package, deb package or tar.gz package to install F-Secure Internet Gatekeeper
for Linux.
￭ Use the rpm package for installation if possible.
You can install updates by following the same steps. The existing configuration settings are not
￭
changed.

4.1 Installing an rpm Package

This section explains how to install F-Secure Internet Gatekeeper for Linux on a server, which runs
one of the Red Hat family of Linux distributions.
In a Red Hat distribution, you can easily install the software by using the rpm package. The Red Hat
family of distributions include the following:
￭ Red Hat
Turbolinux
￭
￭ SUSE Linux
MIRACLE LINUX / Asianux
￭
* Please refer to the related installation guides for instructions on how to install each distribution.
You can install the package by double clicking the rpm package, or executing the following command
with root privileges:
# rpm -Uvh fsigk-XXX.i386.rpm
This installs the whole product and makes the web console available for use.
Next, see "Typical
4. Installing F-Secure Internet
Configurations", 15.
F-Secure Internet Gatekeeper for Linux/Administrator's Guide
Gatekeeper for Linux
13