Preventing Users From Changing Settings; Setting All Virus Protection Settings As Final - F-SECURE CLIENT SECURITY 9.00 Administrator's Manual

82 | F-Secure Client Security | Configuring virus and spyware protection

Preventing users from changing settings

If you want to make sure that the users cannot change some or any of the virus protection settings, you can
make these settings final.
There are different possibilities for doing this:
• If you want to prevent users from changing a certain setting, click on the lock symbol beside it.
• When you are on one of the pages on the
once by clicking
an attached lock symbol and it operates all lock symbols on the page at once.
• If you want to make all settings for both virus protection and Internet Shield final, go to the
and Centralized management
operation also makes the

Setting all virus protection settings as final

In this example, all the virus protection settings are set as final.
1. Select
2. Go to the
3. Check that all the settings on this page are defined as they should be.
4. Click Disallow user
All settings on this page are now marked as final.
5. Select the
6. Check that all the settings on this page are defined as they should be.
7. Click Disallow user
8. Select the
9. Check that all the settings on this page are defined as they should be.
10. Click Disallow user
11. Select the
12. Check that all the settings on this page are defined as they should be.
13. Click Disallow user
14. Click
Disallow user changes. This page-specific shortcut affects only the settings that have
page, and click
Advanced mode
Root on the Policy domains
Settings tab and select the
changes.
Real-time scanning page.
changes.
Manual scanning page.
changes.
E-mail scanning page.
changes.
to save and distribute the policy.
Settings tab, you can set all the settings on the page final at
Do not allow users to change any
settings final.
tab.
Automatic updates page.
Settings tab
settings.... This