F-SECURE CLIENT SECURITY 9.00 Administrator's Manual page 166

166 | F-Secure Client Security | Modifying prodsett.ini
[FSPSINST.DLL]
StartImmediatelyForApps= iexplore.exe,firefox.exe,
netscape.exe,opera.exe, msimn.exe,outlook.exe,
mozilla.exe
[FSNACINS.DLL]
RequestInstallMode=1
CTAversion=1.0.55
Debug=0 | 1
InstallMode=0 | 1
Settings for Client Security - Network Scanner
1 = HTTP Scanning enabled
This setting defines which executables should start
HTTP scanning immediately. Other processes will go
in scanning mode only after the first access to an
external server port 80.
This is a comma-separated list of executable names
without paths.
Note: No spaces are allowed between the items.
Settings for Cisco NAC Plugin
0 = Install this component as defined in the
InstallMode setting.
1 = Install this component if newer, or not installed
(default).
2 = Install this component if there is no existing version
of it installed, or if the same or an older version exists.
CTAversion defines the version of the Cisco Trust
Agent included in the package. Cisco Trust Agent
installation package can be updated by replacing the
ctasetup.msi file in the directory where
prodsett.ini resides.
0 = Do not generate debug information (default).
1 = Write debug information into the debug log during
installation and uninstallation.
0 = Do not install this component (default).
1 = Install this component, except if a newer version
already exists.