F-SECURE CLIENT SECURITY 9.00 Administrator's Manual page 161

[F-Secure common]
[Silent Setup]
DestinationDirUnderProgramFiles=F-Secure
Reboot=2
[FSMAINST.DLL]
RequestInstallMode=1
ManagementKey=\\server\path\admin.pub
ManagedStandAlone=
F-Secure Client Security | Modifying prodsett.ini | 161
Common settings
users and administrators, and read-only access to
everyone.
2 = strict policy; files and folders are protected with
permissions granting full access to administrators,
read-write access to power users, read-only access
to users, and no access to everyone.
Note: When SecurityPolicy = 1 or 2, setup
overwrites the access control lists (ACLs) of existing
files, folders ,and registry keys. If you have specifically
configured ACLs, for example, by adding users to
them, you need to reconfigure them after the
installation.
Settings for unattended automatic installation
Default destination path. Do not change this setting
unless your company follows a specific installation
policy.
1 = Reboot automatically after installation.
Attention: This option executes a forced reboot
at the host without prompting the user to save
his/her work. Do not use this option until you are
absolutely sure about the safety of this type of
reboot for the target computer.
2 = Reboot after prompting the user for a confirmation
(default).
Note: This choice executes a normal reboot at
the host, and therefore in some cases the user
could delay the restart or completely prevent it.
3 = Do not reboot after installation.
Settings for Management Agent
This component is always installed when you are
installing a networked client. You do not need to edit
the RequestInstallMode or InstallMode settings
for this component.
Location of the management public key.
Meaningful only in stand-alone installations.
0 = Normal stand-alone installation, no policy files can
be imported (default).
1 = Installed components can be managed with
manually imported policies.