Complete Installation Of The Product; Run Policy Manager Console - F-SECURE CLIENT SECURITY 9.00 Administrator's Manual

Note: This dialog is displayed only if a previous installation of Policy Manager Server was detected
on the computer.
• By default the setup keeps the existing settings. Select this option if you have manually updated the
Policy Manager Server configuration. This option automatically keeps the existing administration, host
and web reporting ports.
• If you want to change the ports from the previous installation, select
overwrites the edited configuration and restores the default settings.
7. Click Next to continue.
8. Select the Policy Manager Server modules to enable:
• The Host module is used for communication with the hosts. The default port is 80.
• The Administration
HTTP port is 8080.
Note: If you want to change the default port for communication, you will also need to change the
HTTP Port Number
By default, access to the
secure way to use the product. When using a connection over a network, please consider securing the
communication with F-Secure SSH.
• The Web Reporting
be enabled. Web Reporting uses a local socket connection to the
server data. The default port is 8081.
By default, access to Web Reporting is allowed also from other computers. If you want to allow access
only from this computer, select
9. Click Next to continue.
10. Select the product installation package(s) to install from the list of available packages, then click
continue.

Complete installation of the product

The next stage is to complete the installation of the product.
1. Review the changes that setup is about to make, then click
When completed, the setup shows whether all components were installed successfully.
2. Click Finish to complete the installation.
3. Restart your computer if you are prompted to do so.

Run Policy Manager Console

The last stage in setting up the product is to run Policy Manager Console for the first time.
To run Policy Manager Console for the first time:
1. Run Policy Manager Console by selecting
F-Secure Policy Manager
When Policy Manager Console is run for the first time, the
needed to create an initial connection to the server. The first page of the Policy Manager Console setup
wizard summarizes the installation process.
2. Click Next to continue.
3. Select your user mode according to your needs:
module is used for communication with Policy Manager Console. The default
setting in Policy Manager Console.
Administration module is restricted to the local machine. This is the most
module is used for communication with Web Reporting. Select whether it should
Restrict access to the local
Start
Console.
F-Secure Client Security | Installing the product | 19
Change
Administration
machine.
Start to start installing the selected components.
Programs F-Secure Policy Manager Console
Console Setup Wizard
settings. This option
module to fetch
Next to
collects the information