Configuring Security Level Autoselection - F-SECURE CLIENT SECURITY 9.00 Administrator's Manual

152 | F-Secure Client Security | Advanced features: Internet Shield

Configuring security level autoselection

In this example, security level autoselection is configured for a subdomain that contains only laptops in such
a way that when the computers are connected to company LAN, the
dialup connection is used, the security level is changed to Mobile.
Before you start, you should know the DNS server IP address and the default gateway's address, as they
are needed for defining the security level autoselection criteria. You can find out these addresses by issuing
the ipconfig -all command in the command prompt.
1. Select
The Advanced mode
2. Select the subdomain on the
3. On the
4. Select the
5. Make sure that security level autoselection is turned on.
To turn on security level autoselection, select
mode
6. Click Add
7. You can enter the data in the cells by selecting a cell and clicking Edit.
For the
• Priority: The rules are checked in the order defined by the priority numbers, starting from the smallest
number.
• Security
40office.
• Method
• Argument
• Method
• Argument
Note: You can only use one argument, for example one IP address, in the
are several default gateways in use in your company, and you want to use all of them in the security
level autoselection, you can create a separate rule for each of them in the table.
The first security level is now ready.
8. Click Add
9. Enter the data in the cells by selecting a cell and clicking Edit.
For the
• Priority: The rules are checked in the order defined by the priority numbers, starting from the smallest
number.
• Security
• Method
• Argument
• Method
• Argument
The configuration is now ready.
10. Click
View Advanced mode
user interface opens.
Policy domains
Policy tab, select F-Secure
Security level autoselection
drop-down list.
to add the first security level, in this example Office.
Office security level you should add the following data:
level: Enter the ID (composed of number and name) of the security level here; for example:
1: Select DNS server IP address
1: Enter the IP address of your local DNS server here; for example: 10.128.129.1.
2: Select Default Gateway IP address
2: Enter the IP address of you default gateway; for example: 10.128.130.1.
to add the second security level, in this example Mobile.
Mobile security level you should add the following data:
level: Enter the ID of the security level here; for example: 20mobile.
1: Select Dialup from the drop-down list.
1: You can leave this empty.
2: Select Always from the drop-down list.
2: You can leave this empty.
to save and distribute the policy.
from the menu.
tree.
F-Secure Internet Shield.
page.
User can change
from the drop-down list.
from the drop-down list.
Office security level is used; when a
or Admin full control from the
Argument
Autoselect
field. If there