Advertisement
Quick Links
Advertisement
Related Manuals for Idis DC-D6831WRA
Summary of Contents for Idis DC-D6831WRA
- Page 1 Network Camera Quick Guide DC-D6831WRA DC-D6631WRA Powered by...
-
Page 2: Safety Precautions
Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Important Safeguards 1. Read Instructions 10. Overloading All the safety and operating instructions should be read before the Do not overload wall outlets and extension cords as this can result appliance is operated. -
Page 3: Fcc Compliance Statement
IDIS Co., Ltd. reserves all rights concerning this document. Use or duplication of this document in part or whole without the prior consent of IDIS Co., Ltd. is strictly prohibited. Contents of this document are subject to change without prior notice for reasons such as functionality enhancements. -
Page 4: Dome Cover
Protect Connector Desiccant, double-sided tape Allen Wrench Screws and Anchors (each 3 ea.) Please download software (IDIS Discovery, IDIS Center) and product manual from this link : - IDIS Website (www.idisglobal.com) - Search IDIS Discovery and IDIS Center. Overview Body •... -
Page 5: Camera Installation
Anti-Reflection SD Memory Card Slot Bushing Camera Body Cable Rubber Installation Bracket Pipe Cover Camera Installation Remove the Dome Cover and Body Loosen the screws counterclockwise using the Allen wrench provided with the product. Inserting an SD Memory Card Insert an SD memory card into the SD memory card slot with the ‘micro SD’... - Page 6 When connection the cable to the side Refer to the installation bracket and drill holes that align with the screw and cable positions. Use the tool to remove it as shown below. When installing by connection the pipe Press the pipe cover left and right to separate it, then connect the pipe to the installation bracket as shown in the figure.
- Page 7 The use of lubricant is recommended to insert the LAN cable smoothly. Pull the cable slightly and arrange the rubber as shown below. Attach the enclosed desiccant folding in half in the bottom to prevent moisture. Desiccant To pass through a thin cable or more than two cables, it is advised to finish it using silicon to make sure waterproofed perfectly.
-
Page 8: Close The Dome Cover
Close the Dome Cover Fasten the screws for the dome cover clockwise using the Allen wrench provided with the camera. Click Connect external devices, the network cable, and the power adapter. Adjust the angle. For more information, refer to the Angle Adjustment. Angle Adjustment Remove the protective film inside and outside before closing the dome cover. - Page 9 Dimension Ø 100mm Ø 160mm...
-
Page 10: Specifications
Specifications Operating Temperature -40°C ~ +55°C (-40°F ~ +131°F) Boot Up Temperature -20°C ~ +55˚C (-4°F ~ +131˚F) Operating Humidity 0% ~ 90% Power Source , PoE(IEEE 802.3af, Class 3) Power Consumption , 1.1A, 13.2W PoE, IEEE 802.3af(Class 3), 57V , 12W Approval FCC, CE, IP67, IK10, NEMA4X... - Page 12 IDIS Co., Ltd. For more information, please visit www.idisglobal.com...
Need help?
Do you have a question about the DC-D6831WRA and is the answer not in the manual?
Questions and answers