Page 1
User Manual of Product 1: Avalon Premium Hot/Cold Top Loading Countertop Water Cooler Dispenser With Child Safety Lock. UL/Energy Star Approved- Black User Manual of Product 2: Vitapur GWF8 Water Filtration System For Top-load Water Dispensers , White...
Page 2
A few simple steps to ensure perfect water, every time.
Page 4
Use and Care Guide MODELS: A1CTWTRCLRWHT • A1CTWTRCLRBLK Registration Please visit the website below to register your new water cooler within the first 30 days of purchase. Registration within the first 30 days will activate your one year warranty. www.avalonh2o.com/register-my-avalon-cooler Please keep your model number, order number and purchase date for future support.
Contents About Your Water Cooler Meet Your Avalon Product Part Names Indicator Lights Tech Specs Getting Started Unpacking 8-10 Operation instructions Cleaning 12-14 Rinsing, Cleaning and Draining 15-16 Cleaning Troubleshooting 18-19 Safety 21-22...
About Your Water Cooler Meet Your Avalon Product Attractive Design Custom Temperature Top Loading Modern countertop Piping hot, Suitable for 3 or design with or crisp cold water 5 gallon bottles press-paddle spouts UL Listed Energy Star Approved Child Safety Feature...
About Your Water Cooler Part Names 1. Bottle Supporter 2. Heating Indicator Light 4. Power Indicator Light 3. Cooling Indicator Light 7. Child Safety Button 5. Cold Water Spout 8. Hot Water Spout 6. Cold Water Press Paddle 9. Hot Water Press Paddle 10.
Page 8
About Your Water Cooler Part Names 13. Heating Switch 14. Cooling Switch...
About Your Water Cooler Indicator Lights Power Indicator Light This light will remain on as long as the water cooler is plugged in to indicate that the cooler is on. Heating Indicator Light This light will indicate when the water is heating. The light will remain on while the water is heating and will turn off when it has reached the correct temperature of 185°F.
About Your Water Cooler Tech Specs Model A1CTWTRCLRWHT • A1CTWTRCLRBLK Hot/Cold Temp Output 1.2L/min / 2.5L/min Hot Water Capacity 4 L/H ( ≥ 185°F) Hot Tank Volume 1.02 Liters Cold Water Capacity 2 L/H ( ≤ 47°F) Cold Tank Volume...
Getting Started Unpacking your Avalon Water Cooler The unit has been cleaned prior to departing from the factory. To remove any dust and debris that may collect during shipping we recommend cleaning the unit prior to installation, see pages, 12-16.
Getting Started Operation Instructions Do not plug in the machine or turn on the heating (#13) and cooling (#14) switches until water has begun to dispense from the cold water spout (#5) and the hot water spout (#8). 1. Remove any label or sticker from 2.
Page 14
Getting Started Operation Instructions 3. Press the hot (#9) and cold (#6) 4. Once water is dispensing from water press paddles for the hot both spouts insert the power plug (#8) and the cold (#5) water spout into a power socket. Turn on (I) the to dispense a drop of water.
Page 15
Getting Started Operation Instructions 5. Once the switches are in the on position 6. When the water has reached the the heating indicator light (#2) and the appropriate temperatures for hot and cooling indicator light (#3) will turn on (I). It cold the indicator lights will turn off will take about 15 –...
Cleaning Rinsing, Cleaning, and Draining To prolong the lifetime of the machine, it is recommended that the unit be cleaned and sanitized manually about every six months. To clean the outside of the unit Use a disinfectant of your choice to wipe down the outside of the machine. Disinfectant does not come with this unit.
Page 18
Cleaning Rinsing, Cleaning, and Draining 3. Dispense about 2 liters of 4. Place a large bucket beneath the water from the unit into a bucket drain outlet (#12) located on the back by pressing dispense buttons for of the unit. Remove the drain cover and each temperature.
Page 19
Cleaning Rinsing, Cleaning, and Draining 5. Remove any remaining water in 6. After draining is complete, the tanks by dispensing water from replace the drain cover and the hot water spout (#8) and the cold plug and use the machine water spout (#5) into a bucket.
Cleaning Cleaning To remove mineral deposits that may have built up inside the the cold tank, mix 4 L of water with 200 g of citric acid crystals not included) or a cleaning solution of your choice. 1. Twist or lift off the bottle 2.
Page 21
Cleaning Cleaning 3. Plug in the power cord and turn on 4. Turn off (O) the heating switch (I) the heating switch (#13). Allow the (#13) and allow the liquid mixture to water to heat for 15 minutes. cool down for 20 minutes. 15 min 20 min 5.
Page 23
Troubleshooting Troubleshooting If you are having trouble with your water cooler please see the following solutions. You can also view our trouble shooting videos at the website below. Please feel free to contact us with any questions. 1-800-256-0695 support@avalonh2o.com www.avalonh2o.com...
Page 24
Troubleshooting Troubleshooting Water not dispensing at a hot or cold temperature This could be caused by an over consumption of water in a short period of time causing the tanks to empty. Please allow 5 to 10 minutes for the water cooler tanks to refill. Allow the proper time for the water to heat and cool.
Page 26
Safety Safety To reduce risk of injury and property damage, user must read this entire guide before assembling, installing and operating the dispenser. Failure to execute the instructions in this manual can cause personal injury or property damage. This product dispenses water at very high temperatures. Failure to use this properly can cause personal injury.
Page 27
Safety Safety • Ensure dispenser is unplugged prior to cleaning. • Never allow children to dispense hot water without proper and direct supervision. Unplug unit to prevent unsupervised use by children. • Service should be performed only by a certified technician. •...
WATER DISPENSER FILTRATION SYSTEM Use & Care Guide CAUTION: Before using the water filtration system, read this manual and follow all safety rules and operating instructions. PATENT # 137611 Tested and certified by CSA Group to the requirements of NSF/ANSI Standard 42 and CSA B483.1 for the reduction of chlorine, taste and odor.
Page 30
YOUR VITAPUR WATER FILTRATION SYSTEM ® Thank you for purchasing the Vitapur Water Filtration System for water ® dispensers! We at GHP Group Inc. have designed and manufactured a water filtration system to provide you and your family, friends and co-workers with great tasting, hassle free water.
Page 31
YOUR VITAPUR WATER FILTRATION SYSTEM ® TOP COVER PRE-FILTER RING UPPER CHAMBER GWF3 LONG LIFE REPLACEMENT FILTER LOWER CHAMBER SILICONE FLOAT SEAL FLOAT IMPORTANT: The Vitapur Water ® Filtration System is designed to fit all Vitapur water dispensers and most ®...
Page 32
Insist on a genuine GWF3 Vitapur Long Lasting ® Replacement Filter for great tasting water! STAGE 1: PREFILTER CAP Collects and guides water into filter. Separates large particles from water. STAGE 2: FINE POLYFIBER PAD Strains large sediment from water and slows water flow.
Page 33
OPERATING INSTRUCTIONS Lower Chamber Assembly 1. Check that the silicone plug has been installed and locked onto the float securely. 2. Attach the float into the threaded float base at the bottom of the lower chamber. 3. Place the assembled lower chamber on the water dispenser.
Page 34
OPERATING INSTRUCTIONS Filling the Filtration System 3. TO AVOID LEAKING AND/OR OVERFLOWING, DO NOT EXCEED THE MAX LEVELS. DO NOT ADD WATER TO THE UPPER CHAMBER IF THE LOWER CHAMBER IS FULL. 4. Close the top cover. 5. Add water regularly to ensure the long-life filter is immersed in water at all times between the “MIN”...
Page 35
GOING AWAY ON VACATION When not using the water filtration system for more than a week or when going on vacation, please ensure the lower chamber is full and the filter immersed in water, as the long-life filter will dry out. Always drain out any residual water when ready to start using it again.
Page 36
GWF8 WARRANTY GHP Group Inc. warrants your water filtration system to be free from manufacturer’s defects in workmanship or material under normal operating conditions for 1 year from the original date of purchase. The warranty is available to the original purchaser and is non transferable. The filter/pre-filter is not covered under warranty.
Need help?
Do you have a question about the A1CTWTRCLRWHT and is the answer not in the manual?
Questions and answers