1. Manuals
  2. Brands
  3. Ronix Manuals
  4. Paint Sprayer
  5. 1340
  6. Manual

Ronix 1340 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SPRAY GUN
1340

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1340 and is the answer not in the manual?

Questions and answers

Related Manuals for Ronix 1340

Summary of Contents for Ronix 1340

  • Page 1 SPRAY GUN 1340...

  • Page 2: Specification

    Air pressure 14.4 Kpa Max Flow 900ml/min Max. Viscosity 60din/s Paint Reservior 1200ml Painting System HVLP Suplied In Ronix Color box Weight 1.75kg 1×viscosity cup, 1×cleaning needle Includes 3×nozzles: 2.2/1.8/1.5mm 1×cleaning brush, PART LIST Spray gun front part Union nut...

  • Page 3: Explanation Of Symbols Used

    Please read the Operating Manual carefully and observe the safety information before starting the device. Store the Operating Manual in a safe place close to the product in case it needs to be used by someone else. EXPLANATION OF SYMBOLS USED This symbol indicates a potential danger for you or for the device.
  • Page 4 Keep children and other persons away when using the power tool. You can lose control of the tool if you are distracted. ELECTRICAL SAFETY The tool plug must fit into the socket. The plug may not be modified in any form. Do not use adaptor plugs together with protective-earthed tools.
  • Page 5 off before you connect it to the power supply, pick it up or carry it. Accidents can occur if you carry the power tool while your finger is on the switch or if you connect the power tool to the power supply which it is on.

  • Page 6: Safety Instructions For Spray Guns

    repaired before using the tool. Many accidents have their origin in power tools that have been maintained badly. Use the power tool, accessories, insert tools, etc. in accordance with these instructions and in a fashion specified for this special tool type. Take the working conditions and the activity to be carried out into consideration.

  • Page 7: Residual Risks

    RECOMMENDATION: Wear a breathing mask and safety glasses when spraying. CAUTION! -Never point the spray gun at yourself, at other people or at animals. - When working with the tool indoors as well as outdoors ensure that no solvent vapors are sucked in by the spray gun. - When working outdoors, be aware of the wind direction.

  • Page 8: Coating Materials Not Suitable For Use

    COATING MATERIALS NOT SUITABLE FOR USE Wall paints without the red Perfect Spray logo. Alkali and acidic paints. Flammable materials. PREPARATION OF THE COATING MATERIAL Fill test cup then Hold up and measure the time in seconds until the liquid empties out. This time is called “Runout Time in Seconds”. NOTE: Stir the spraying material thoroughly before measuring and fill into the canister.
  • Page 9 START-UP WARNING! Before connecting to the mains supply, be sure that the supply voltage is identical with the value given on the rating plate. - Unscrew the container from the spray gun. - Aligning suction tube. - If the suction tube is positioned correctly, the container contents can be sprayed without almost any residue.

  • Page 10: Adjusting The Desired Spray Setting

    Click Fig. 3 - Put the machine down only on a level, clean surface. Otherwise the machine could tip over! - push the trigger guard. The has a two-stage trigger guard. In the first stage the turbine is started. If the trigger guard is pressed further, the material is transported.

  • Page 11: Adjusting The Material Volume

    Fig. 4 Fig. 5 ADJUSTING THE MATERIAL VOLUME Set the material volume by turning the regulator on the trigger guard of the spray gun. (Fig.6)  - turn to the left lower material volume  + turn to the right higher material volume Fig.
  • Page 12 - Cover all surfaces not to be sprayed. - Cover screw threads or similar parts of the target object. - It is advisable to test the spray gun on cardboard or a similar surface to find the correctsetting. IMPORTANT - Begin spraying outside of the target area and avoid interruptions inside the target area.

  • Page 13: Interruption Of Work

    Fig.8 INTERRUPTION OF WORK - Turn the machine off. - When processing 2-component varnishes, clean the device immediately. TAKING OUT OF OPERATION AND CLEANING Proper cleaning is the prerequisite for problem-free operation of the paint application device. No warranty claims are accepted in case of improper or no cleaning.
  • Page 14 the nozzle is clear. 8- Turn off the machine and remove the plug. 9- Screw of the container and empty it. Pull out the suction tube with container seal. CAUTION! Never clean seals, diaphragm and nozzle or air holes of the spray gun with metal objects.

  • Page 15: Maintenance

    MAINTENANCE WARNING! - Never operate the machine without the air filter; dirt could be sucked in and interfere with the function of the machine. Disconnect plug before changing parts. - Change the air filter if it is soiled (Fig. 9). Fig.9 - In order to mount the gun more easily apply lubricating grease (enclosed) liberally to the O-ring at the gun front part.
  • Page 16 • Nozzle loose  Tighten Coating material • Nozzle worn  Change drips from the • Nozzle seal is missing or worn  Insert an intact nozzle seal nozzle • Coating material assembly at air  Tighten container cap, nozzle or needle •...

Table of Contents