Summary of Contents for Cincoze CS-110HC/P1201 Series
Page 1
CS-100/P1201 Series User Manual Power Efficient Sunlight Readable Panel PC 8.4”~24” TFT-LCD Sunlight Readable and Modular Panel PC with Intel® Elkhart Lake Atom® x6000E Series Processor Version: V1.13...
1.2 Highlights..........................13 1.3 Key Features ........................... 14 1.4 Hardware Specification ......................15 1.4.1 CS-108C/P1201 Series ....................15 1.4.2 CS-110HC/P1201 Series ....................19 1.4.3 CS-112HC/P1201 Series ....................23 1.4.4 CS-115C/P1201 Series ....................27 1.4.5 CS-W115FHC/P1201 Series ..................31 1.4.6 CS-117C/P1201 Series ....................35 1.4.7 CS-119C/P1201 Series ....................
Page 3
Chapter 3 System Setup ........................64 3.1 Removing Top Cover....................... 65 3.2 Installing SO-DIMM Memory ....................66 3.3 Installing Mini-PCIe Card ......................67 3.4 Installing M.2 E Key Card ......................68 3.5 Installing Antenna(s) ......................69 3.6 Installing CPU Thermal Pad ....................71 3.7 Installing Top Cover ........................
Page 4
6.2 Installing CFM Modules ......................110 6.2.1 CFM-IGN101 ......................110 6.2.2 CFM-PoE02 ........................ 111 6.3 Installing Accessories ......................113 6.3.1 VESA Mounting ......................113 6.3.2 URM01 ........................114 CS-100/P1201 Series | User Manual...
(such as a fuse, battery, etc.), are not warranted. Before sending your product in, you will need to fill in Cincoze RMA Request Form and obtain an RMA number from us. Our staff is available at any time to provide you with the most friendly and immediate service.
Limitation of Liability Cincoze’ liability arising out of the manufacture, sale, or supplying of the product and its use, whether based on warranty, contract, negligence, product liability, or otherwise, shall not exceed the original selling price of the product. The remedies provided herein are the customer’s sole and exclusive remedies.
Conventions Used in this Manual This indication alerts operators to an operation that, if not strictly observed, may result in severe injury. (Cette indication avertit les opérateurs d'une opération qui, si elle n'est pas strictement observée, peut entraîner des blessures graves.) This indication alerts operators to an operation that, if not strictly observed, may result in safety hazards to personnel or damage to equipment.
13. Never open the equipment. For safety reasons, the equipment should be opened only by qualified service personnel. If one of the following situations arises, get the equipment checked by service personnel: ⚫ The power cord or plug is damaged. ⚫...
USB 3.2, COM, and DIO), Mini PCIe and M.2 Key E Type 2230 expansion slots, and exclusive CFM expansion to add functions such as PoE and IGN. Cincoze’s exclusive patented Convertible Display System (CDS) technology enables further flexible future computer performance upgrades and screen replacements. The robust CS-100/P1201 series is well-suited for outdoor kiosks or HMI applications.
⚫ 1x DDR4 SO-DIMM ⚫ Designed with Rugged Aluminum Die-casting Front Bezel ⚫ Support Panel / VESA / Rack Mount ⚫ Front Panel IP65 Compliant ⚫ Wide Operating Temperature ⚫ Cincoze Patent CDS Technology Support CS-100/P1201 Series | User Manual...
1.4 Hardware Specification 1.4.1 CS-108C/P1201 Series Model Name CS-108C Display • 8.4" (4:3) LCD Size • 800 x 600 Max. Resolution • 1600 Brightness (cd/m2) • 600 : 1 Contrast Ratio • 16.2M LCD Color • 0.213 (H) x 0.213 (V) Pixel Pitch •...
Page 16
• UL, cUL, CB, IEC, EN 62368-1 Safety Model Name P1201 System • Intel® Atom® x6425E Processor (1.5M Cache, up to 3.00 GHz, 12W) Processor • Intel® Atom® x6211E Processor (1.5M Cache, up to 3.00 GHz, 6W) • 1x DDR4 SO-DIMM Socket Memory •...
Page 17
Other Function • 1x Clear CMOS Switch Clear CMOS Switch • 1x Reset Button Reset Button • Support 0.2sec Instant Reboot Technology Instant Reboot • Software Programmable Supports 256 Levels System Reset Watchdog Timer • LCD On/Off, Brightness Up, Brightness Down OSD Button •...
Page 18
• UL, cUL, CB, IEC/ EN 62368-1 Safety * Product Specifications and features are for reference only and are subject to change without prior notice. For more information, please refer to the latest product datasheet from Cincoze's website. Dimension CS-108C/P1201...
1.4.2 CS-110HC/P1201 Series Model Name CS-110HC Display • 10.4" (4:3) LCD Size • 1024 x 768 Max. Resolution • 1500 Brightness (cd/m2) • 1000 : 1 Contrast Ratio • 16.2M LCD Color • 0.206 (H) x 0.206 (V) Pixel Pitch •...
Page 20
Model Name P1201 System • Intel® Atom® x6425E Processor (1.5M Cache, up to 3.00 GHz, 12W) Processor • Intel® Atom® x6211E Processor (1.5M Cache, up to 3.00 GHz, 6W) • 1x DDR4 SO-DIMM Socket Memory • Supports DDR4 3200MHz Memory Up to 32GB (un-buffered and non-ECC) •...
Page 22
* Product Specifications and features are for reference only and are subject to change without prior notice. For more information, please refer to the latest product datasheet from Cincoze's website. Dimension CS-110HC/P1201 Unit: mm CS-100/P1201 Series | User Manual...
1.4.3 CS-112HC/P1201 Series Model Name CS-112HC Display • 12.1" (4:3) LCD Size • 1024 x 768 Max. Resolution • 1500 Brightness (cd/m2) • 700 : 1 Contrast Ratio • 16.7M LCD Color • 0.24 (H) x 0.24 (V) Pixel Pitch •...
Page 24
Model Name P1201 System • Intel® Atom® x6425E Processor (1.5M Cache, up to 3.00 GHz, 12W) Processor • Intel® Atom® x6211E Processor (1.5M Cache, up to 3.00 GHz, 6W) • 1x DDR4 SO-DIMM Socket Memory • Supports DDR4 3200MHz Memory Up to 32GB (un-buffered and non-ECC) •...
Page 26
* Product Specifications and features are for reference only and are subject to change without prior notice. For more information, please refer to the latest product datasheet from Cincoze's website. Dimension CS-112HC/P1201 Unit: mm CS-100/P1201 Series | User Manual...
1.4.4 CS-115C/P1201 Series Model Name CS-115C Display • 15" (4:3) LCD Size • 1024 x 768 Max. Resolution • 1800 Brightness (cd/m2) • 800 : 1 Contrast Ratio • 16.2M LCD Color • 0.297 (H) x 0.297(V) Pixel Pitch • 160 / 150 Viewing Angle •...
Page 28
Model Name P1201 System • Intel® Atom® x6425E Processor (1.5M Cache, up to 3.00 GHz, 12W) Processor • Intel® Atom® x6211E Processor (1.5M Cache, up to 3.00 GHz, 6W) • 1x DDR4 SO-DIMM Socket Memory • Supports DDR4 3200MHz Memory Up to 32GB (un-buffered and non-ECC) •...
Page 30
* Product Specifications and features are for reference only and are subject to change without prior notice. For more information, please refer to the latest product datasheet from Cincoze's website. Dimension CS-115C/P1201 Unit: mm CS-100/P1201 Series | User Manual...
1.4.5 CS-W115FHC/P1201 Series Model Name CS-W115FHC Display • 15.6" (16:9) LCD Size • 1920 x 1080 (Full HD) Max. Resolution • 1,200 Brightness (cd/m2) • 800 : 1 Contrast Ratio • 16.7M LCD Color • 0.17925 (H) x 0.17925 (V) Pixel Pitch (mm) •...
Page 32
Model Name P1201 System • Intel® Atom® x6425E Processor (1.5M Cache, up to 3.00 GHz, 12W) Processor • Intel® Atom® x6211E Processor (1.5M Cache, up to 3.00 GHz, 6W) • 1x DDR4 SO-DIMM Socket Memory • Supports DDR4 3200MHz Memory Up to 32GB (un-buffered and non-ECC) •...
Page 34
* Product Specifications and features are for reference only and are subject to change without prior notice. For more information, please refer to the latest product datasheet from Cincoze's website. Dimension CS-W115FHC/P1201 Unit: mm CS-100/P1201 Series | User Manual...
1.4.6 CS-117C/P1201 Series Model Name CS-117C Display • 17" (5:4) LCD Size • 1280 x 1024 Max. Resolution • 1500 Brightness (cd/m2) • 800 : 1 Contrast Ratio • 16.7M LCD Color • 0.264 (H) x 0.264 (V) Pixel Pitch •...
Page 36
Model Name P1201 System • Intel® Atom® x6425E Processor (1.5M Cache, up to 3.00 GHz, 12W) Processor • Intel® Atom® x6211E Processor (1.5M Cache, up to 3.00 GHz, 6W) • 1x DDR4 SO-DIMM Socket Memory • Supports DDR4 3200MHz Memory Up to 32GB (un-buffered and non-ECC) •...
Page 38
* Product Specifications and features are for reference only and are subject to change without prior notice. For more information, please refer to the latest product datasheet from Cincoze's website. Dimension CS-117C/P1201 Unit: mm CS-100/P1201 Series | User Manual...
1.4.7 CS-119C/P1201 Series Model Name CS-119C Display • 19" (5:4) LCD Size • 1280 x 1024 (SXGA) Max. Resolution • 1600 Brightness (cd/m2) • 1000 : 1 Contrast Ratio • 16.7M LCD Color • 0.294 (H) x 0.294 (V) Pixel Pitch •...
Page 40
Model Name P1201 System • Intel® Atom® x6425E Processor (1.5M Cache, up to 3.00 GHz, 12W) Processor • Intel® Atom® x6211E Processor (1.5M Cache, up to 3.00 GHz, 6W) • 1x DDR4 SO-DIMM Socket Memory • Supports DDR4 3200MHz Memory Up to 32GB (un-buffered and non-ECC) •...
Page 42
* Product Specifications and features are for reference only and are subject to change without prior notice. For more information, please refer to the latest product datasheet from Cincoze's website. Dimension CS-119C/P1201 Unit: mm CS-100/P1201 Series | User Manual...
1.4.8 CS-W121C/P1201 Series Model Name CS-W121C Display • 21.5” (16:9) LCD Size • 1920x1080 (Full HD) Max. Resolution • 1000 Brightness (cd/m2) • 5000 : 1 Contrast Ratio • 16.7M LCD Color • 0.24825 (H) x 0.24825 (V) Pixel Pitch •...
Page 44
Model Name P1201 System • Intel® Atom® x6425E Processor (1.5M Cache, up to 3.00 GHz, 12W) Processor • Intel® Atom® x6211E Processor (1.5M Cache, up to 3.00 GHz, 6W) • 1x DDR4 SO-DIMM Socket Memory • Supports DDR4 3200MHz Memory Up to 32GB (un-buffered and non-ECC) •...
Page 46
* Product Specifications and features are for reference only and are subject to change without prior notice. For more information, please refer to the latest product datasheet from Cincoze's website. Dimension CS-W121C/P1201 Unit: mm CS-100/P1201 Series | User Manual...
1.4.9 CS-W124C/P1201 Series Model Name CS-W124C Display • 24” (16:9) LCD Size • 1920x1080 Max. Resolution • 1500 Brightness (cd/m2) • 5000 : 1 Contrast Ratio • 16.7M LCD Color • 0.27675 (H) x 0.27675 (V) Pixel Pitch • 178/178 Viewing Angle •...
Page 48
Model Name P1201 System • Intel® Atom® x6425E Processor (1.5M Cache, up to 3.00 GHz, 12W) Processor • Intel® Atom® x6211E Processor (1.5M Cache, up to 3.00 GHz, 6W) • 1x DDR4 SO-DIMM Socket Memory • Supports DDR4 3200MHz Memory Up to 32GB (un-buffered and non-ECC) •...
Page 50
* Product Specifications and features are for reference only and are subject to change without prior notice. For more information, please refer to the latest product datasheet from Cincoze's website. Dimension CS-W124C/P1201 Unit: mm CS-100/P1201 Series | User Manual...
1.5 System I/O 1.5.1 Front Antenna Clear CMOS Used to clear CMOS to reset BIOS Used to install an antenna jack Front Accessible 2.5” HDD Tray SIM Card Slot Used to inserts a 2.5” HDD/SSD Used to inserts a SIM card Power LED Reset Switch Indicates the power status of the system...
1.5.3 Right COM3 Mic-In COM port supports RS232/422/485 serial device Used to connect a microphone Line-Out The Digital I/O terminal block supports 4 digital input Used to connect a speaker and 4 digital output Antenna USB 2.0 Used to install an antenna jack Used to connect USB 2.0/1.1 device 1.5.4 Left Temperature LED...
2.2 Switches and Connectors Definition Location Definition AT_ATX1 AT / ATX Power Mode Switch CLR_CMOS1 Clear CMOS Switch RESET1 Reset Button BL_UP1 Backlight Brightness Increase Button BL_DN1 Backlight Brightness Decrease Button BL_PWR1 Backlight Power On / Off Button PWR_SW1 Power Switch Super CAP SW PWR_SSD_LED1 Power LED/ HDD LED...
SPK_L1 Speaker Out Connector for left side GDC1 Super CAP for CMOS Backup BAT1 RTC Battery Holder Power Select for COM1/COM2/COM3 2.3 Definition of Switches AT_ATX1: AT / ATX Power Mode Switch Switch Definition 1-2 (Right) ATX Power Mode (Default) 2-3 (Left) AT Power Mode PWR_SW1: System Power Button...
Page 59
SW1: Super CAP SW Location Function DIP1 DIP2 Enabled ON (Default) Super ON (Default) Disabled SW2: Power Select for COM1/COM2/COM3 Location Function DIP1 DIP2 ON (Default) ON (Default) COM1 Location Function DIP3 DIP4 ON (Default) ON (Default) COM2 Location Function DIP5 DIP6 ON (Default)
Page 62
PEWAKE1# WTCLKN/REFCLKP1 +3.3V WTCLKP/REFCLKN1 +3.3V DC_IN1: DC Power Input Connector (9-48V) Connector Type: Terminal Block 1x3 3-pin, 5.0mm pitch Definition 9-48V IN Ignition (IGN) 1 2 3 Please disconnect the power source before mounting the DC power cables or connecting the DC power connector to system.
Page 63
COM1_1 / COM2_1 / COM3_1: RS232 / RS422 / RS485 Connector Connector Type: 9-pin D-Sub RS422 / 485 RS485 RS232 Definition Full Duplex Half Duplex Definition Definition DATA - DATA + POWER1: +5V / +12V Power Output Pin 1 Connector Type: 1x4 4-pin Wafer, 2.0mm pitch Definition +12V CS-100/P1201 Series | User Manual...
3.1 Removing Top Cover In order to prevent electric shock or system damage, must turn off power and disconnect the unit from power source before removing the chassis cover. (Afin d'éviter tout risque d'électrocution ou d'endommagement du système, vous devez couper l'alimentation et débrancher l'appareil de la source d'alimentation avant de retirer le couvercle du châssis.) 1.
3.2 Installing SO-DIMM Memory 1. Locate the SO-DIMM sockets. 2. Tilt the SO-DIMM module at a 45-degree angle and insert it to SO-DIMM socket until the gold-pated connector of module contacted firmly with the socket. 45° 3. Press the modules down until it’s fixed firmly by the two locking latches on each side. CS-100/P1201 Series | User Manual...
3.3 Installing Mini-PCIe Card (Applicable for full or half size card) Locate the Mini PCIe slot. Insert the Mini-PCIe card at a 45-degree angle and insert it to the slot until the gold-pated connector of module contacted firmly with the slot. 45°...
If you have a Half-size Mini-PCIe card, make sure use extender to make it Full-size as shown below. 3.4 Installing M.2 E Key Card 1. Locate the M.2 E Key slot on the system board. 2. Tilt the M.2 E Key card at a 45-degree angle and insert it to the socket until the golden finger connector of the card seated firmly.
3. Press the card down and secure it with 1 screw. 3.5 Installing Antenna(s) Please install a mPCIe Wireless Lan card before putting on the washer and fasten the nut to the antenna jack. 1. Remove the antenna hole covers at front or side panel. CS-100/P1201 Series | User Manual...
Page 70
2. Have antenna jack penetrate through the hole. 3. Put on washer and fasten the nut with antenna jack. 4. Assemble the antenna and antenna jack together. CS-100/P1201 Series | User Manual...
5. Attach the RF connector at another end of cable onto the module. 3.6 Installing CPU Thermal Pad 1. Place the thermal pad on the CPU heatsink. thermal pad Before assembling the system’s chassis cover, please make sure the protective film on the Thermal Pad has been removed! (Avant d'assembler le couvercle du châssis du système, assurez-vous que le film protecteur sur le coussin thermique a été...
Installing SIM Card 1. Loosen 2 screws on front panel to remove cover plate. 2. SIM card slot is at the front panel of the system. 3. Insert the SIM card. CS-100/P1201 Series | User Manual...
Disassembling Display Module The complete shipping product is the CS display module already installed with P1201. This chapter will introduce how to dissemble the CS display module from P1201. 1. Remove the 6 screws on the display module. 2. Disconnect the modules. CS-100/P1201 Series | User Manual...
3.10 Installing SATA Hard Drive 1. Loosen 2 screws on front panel to remove cover plate. 2. Turn over the unit to have the bottom side face up and loosen 1 screw. 3. Pull out the HDD bracket. CS-100/P1201 Series | User Manual...
Page 76
4. Make the bottom side of the HDD face up, place the HDD bracket on it. Ensure the direction of bracket is correct and use 4 provided screws to assemble HDD and HDD bracket together. 5. Align the HDD bracket with the entrance of HDD bay. And insert the HDD bracket until the connector of HDD contact the SATA connector firmly.
3.11 Installing Panel Mount 1. Accessories provided by Cincoze are as below. Before assembly, please prepare panel mount PPC and customer’s fixture. CS-100/P1201 Series | User Manual...
Page 78
2. All mounting kits displayed are to be inserted into holes. 3. Installation preparation and steps. CS-100/P1201 Series | User Manual...
Page 80
4. Apply all mount kits to the rest of holes. And you have completed the panel mount installation, as shown below. CS-100/P1201 Series | User Manual...
4.1 BIOS Introduction The BIOS (Basic Input/ Output System) is a program located on a Flash Memory on the motherboard. When you start the computer, the BIOS program will gain control. The BIOS first operates an auto-diagnostic test called POST (power on self-test) for all the necessary hardware, it detects the entire hardware device and configures the parameters of the hardware synchronization.
4.2 Main Setup Press <Del> to enter BIOS CMOS Setup Utility, the Main Menu (as shown below) will appears on the screen. Use arrow keys to move among the items and press <Enter> to accept or enter a sub-menu. ◼ System Date Set the date.
4.3 Advanced Setup This section allows you to configure and improve your system and allows you to set up some system features according to your preference. 4.3.1 CPU Configuration ◼ Intel Virtualization Technology [Enabled] Enables or disables Intel Virtualization Technology. Virtualization enhanced by Intel Virtualization Technology will allow a platform to run multiple operating systems and applications in independent partitions.
4.3.2 SATA Configuration ◼ SATA Controller(s) [Enabled] Enables or disables SATA device. ◼ SATA Mode Selection [AHCI] Allows you to select which mode SATA controller will operates. Configuration options: [AHCI] ❑ Serial ATA Port 0 Port 0 [Enabled] Enables or disables SATA Port 0. ❑...
4.3.5 ACPI Settings ◼ Enable Hibernation [Enabled] Enables or disables system ability to hibernate state (OS/S4 state). This option may not be effective with some OS. ◼ ACPI Sleep State [S3 (Suspend to RAM)] Allows users to select the highest Advanced Configuration Power Interface® (ACPI) sleep state that system will enter when suspend button is pressed.
Page 88
◼ Serial Port 1~3 Configuration. ❑ Serial Port [Enabled] Enables or disables serial port. ❑ Change Settings [Auto] Allows you to change the IO Address & IRQ settings of the specified serial port. ❑ Serial Port Mode [RS232] Allows you to select Serial Port Mode. Configuration options: [RS232] [RS422/RS485 Full Duplex] [RS485 Half Duplex] ◼...
4.3.7 Hardware Monitor This screen displays the current status of all monitored hardware devices/components such as voltages, temperatures. 4.3.8 S5 RTC Wake Settings ◼ Wake system from S5 [Disabled] Enables or disables wake system from S5 (soft-off state). [Disabled]: Disables wake system from S5. [Fixed Time]: Sets a fixed time (HH:MM:SS) to wake system from S5.
4.3.9 Serial Port Console Redirection ◼ Console Redirection [Disabled] Allow users to enable or disable COM1, COM2, COM3 console redirection function. 4.3.10 USB Configuration ◼ XHCI Hand-off [Enabled] Enables or disables XHCI (USB3.0) hand-off function. Use this feature as a workaround for operating systems without XHCI hand-off support.
4.4 Chipset Setup This section allows you to configure chipset related settings according to user’s preference. 4.4.1 System Agent (SA) Configuration ◼ Memory Configuration This item displays detailed memory configuration in the system. ◼ Graphics Configuration ❑ Primary Display [Auto] Allows users to enable or disable Primary Display Configuration options: [Auto] [IGFX] [PCIe] ❑...
4.5 Security Setup This section allows users to configure BIOS security settings. ◼ Administrator Password Administrator Password controls access to the BIOS Setup utility. ◼ User Password User Password controls access to the system at boot and to the BIOS Setup utility. ◼...
4.6 Boot Setup This section allows you to configure Boot settings. ◼ Setup Prompt Timeout [1] Use this item to set number of seconds (1..65535) to wait for setup activation key. ◼ Bootup NumLock State Allows you to set NumLock key to [On] or [Off] state when system boots up. ◼...
4.7 Save & Exit ◼ Save Changes and Exit This item allows you to exit the system after saving changes. ◼ Discard Changes and Exit This item allows you to exit system setup without saving any changes. ◼ Save Changes and Reset This item allows you to reset the system after saving changes.
5.1 Digital I/O (DIO) application This section describes DIO application of the product. The content and application development are better understood and implemented by well experienced professionals or developers. 5.1.1 Digital I/O Programming Guide 5.1.1.1 Pins for Digital I/O 1~8 Item Standard GPIO 74 (PIN 107)
Page 101
GPIO access way by Digital I/O (Access GPIO data register Only) GPIO access way by Coniguration register port (Access 0x4E/0x4F port with device number 0x06) CS-100/P1201 Series | User Manual...
Page 103
5.1.1.4 Sample Code in C Language This sample code is demonstrate how to access GPIO by the way of Configuration Register port. 5.1.1.4.1 Control of GP74 to GP77 (DI1~DI4) #define AddrPort 0x4E #define DataPort 0x4F <Enter the Extended Function Mode> WriteByte(AddrPort, 0x87) WriteByte(AddrPort, 0x87) // Must write twice to enter extended mode...
Page 104
// Select configuration register 60h (High Byte address) WriteByte(DataPort, (0x0A)) WriteByte(AddrPort, 0x61) // Select configuration register 61h (Low Byte address) WriteByte(DataPort, (0x00)) <Leave the Extended Function Mode> WriteByte(AddrPort, 0xAA) Note: Cincoze default DIO Port base address is 0xA00h CS-100/P1201 Series | User Manual...
5.2 Digital I/O (DIO) Hardware Specification ⚫ XCOM+: Isolated power in V+ ⚫ XCOM-: Isolated power in V- ⚫ Isolated power in DC voltage: 9-30V ⚫ 4x Digital Input (Source Type) ⚫ Input Signal Voltage Level Signal Logic 0: XCOM+ = 9V, Signal Low <...
6.2 Installing CFM Modules 6.2.1 CFM-IGN101 1. Locate the IGN connector on system motherboard as indicated. 2. Insert CFM-IGN module vertically to the female connector on the system’s mainboard, and fasten 2 screws to fix it. 3. Loosen 2 screws on front panel to remove cover plate. 4.
6.2.2 CFM-PoE02 1. Locate the PoE connector on system motherboard as indicated. 2. Insert the female connector of CFM-PoE module to the male connector on system motherboard. 3. Turn over the heatsink and paste the thermal pad onto the marked by red squares. Before putting on the thermal block (in the next step), please make sure the protective film on the Thermal Pad has been removed! (Avant de mettre le bloc thermique (à...
Page 112
4. Paste the heatsink onto the CFM-PoE module carefully and fasten 2 screws to fix it. 5. Paste the thermal pads onto the heatsink and coil carefully. Before assembling the system’s chassis cover, please make sure the protective film on the Thermal Pad has been removed! (Avant d'assembler le couvercle du châssis du système, assurez-vous que le film protecteur sur le coussin thermique a été...
6.3 Installing Accessories 6.3.1 VESA Mounting The following picture indicates VESA mounting hole pattern on P1201 series, which is compliant with VESA mounting standard. 1. Please fasten the VESA screws as indicated to fix it on the stand. CS-100/P1201 Series | User Manual...
6.3.2 URM01 1. Locate the screw holes on the PC or monitor module. 2. Put on the rack mount base and fasten the screws. 3. Locate the Rack mount bracket holes. For P2002E For P2002/P1001E For M1101/ P1001/P1101/P1201/P301/ P2102/P2102E/P2202/P2202E/P2302/P2302E For 8.4” ~ 17” Panel PC series For M1101P1001/P1101/P1201/P1301/ P2102/ P2102E/P2202/P2202E/P2302/P2302E For P2002/P1001E For P2002E...
Page 115
4. Assemble two rack mount brackets by fastening 4 screws (M5x6) at each side. Left view Right view Bottom view For 8.4” ~ 17” Panel PC series Left view Right view Bottom view For 19” ~ 24” Panel PC series CS-100/P1201 Series | User Manual...
Page 116
5. Assemble two rack mount brackets by fastening 4 screws (M5x12), flat washers and hex nuts at each side. For 8.4” ~ 17” Panel PC series For 19” ~ 24” Panel PC series CS-100/P1201 Series | User Manual...
Need help?
Do you have a question about the CS-110HC/P1201 Series and is the answer not in the manual?
Questions and answers