Video And Audio - Yamaha RX-A800 Owner's Manual

■
Combining HDMI/AV1-2 input source

video and audio

Audio In
Input source: HDMI1-5, AV1-2
Combines video from HDMI or AV input sources with analog/
digital audio inputs in situations such as:
– an playback device is connected with an HDMI cable but cannot
transmit audio through HDMI
– an playback device with component video output and analog
audio output (such as certain game consoles) are connected to the
system
To change assignments, select an input source (HDMI1-5 or AV1-2)
as the video input first, and then select audio input jacks in this
menu.
Set as follows according on the desired combination of audio input
jacks.
Audio inputs Settings method
Optical digital audio Select AV1 or AV4. Connect the external component
input audio cable to the optical digital jack for the selected
input.
Coaxial digital audio Select AV2 or AV3. Connect the external component
input audio cable to the coaxial digital jack for the selected
input.
Analog audio input Select one of AV5, AV6, AUDIO1, or AUDIO2.
Connect the external component audio cable to the
audio jack for the selected input.
J
1 : AV5-6 or AUDIO1-2 are also available when "Audio Return Channel" is on,
and the input source is used for "TV Audio Input."
■
Setting the format of digital audio signals
Decoder Mode
J1
Input source: HDMI1-5, AV1-4, V-AUX
Sets the format of digital audio to playback to DTS. For example, if
the format is not automatically detected correctly even during
playback of DTS format audio, this item can be used to set the
playback format to DTS.
Auto (Default) The audio format is automatically selected to match
the format of the input audio.
DTS Selects DTS signals only. Other input signals are not
reproduced.
Configuring input sources (Input menu)
■
Selecting the sound program suitable for
listening to compressed audio, such as
MP3
Enhancer
Input source: All input sources other than MULTI CH
Turns on/off the Compressed Music Enhancer mode.
Off (Default) Turns off the Compressed Music Enhancer mode.
On Turns on the Compressed Music Enhancer mode.
■
Charging an iPod™/iPhone™ in standby
mode
Standby Charge
Input source: DOCK (iPod)
Charges an iPod/iPhone stationed in the Universal Dock for iPod /
iPhone or iPod wireless receiver while the receiver is in standby
mode.
Auto (Default)
This unit charges iPod/iPhone when this unit is in
standby mode. While charging an iPod/iPhone, the
HDMI Through/iPod Charge indicator lights. When
HDMI Through function is off, the indicator goes out
after the charging is complete.
Off This unit does not charge iPod/iPhone.
SETUP
80
En