Itunes Tagging; Sirius Satellite Radio - Yamaha RX-A800 Owner's Manual

Yamaha rx-a800: user guide
Hide thumbs Also See for RX-A800:
Table of Contents

Advertisement

iTunes Tagging

Problem
Cause
Tag data cannot be
"YDS-10" does not support tag
transferred to your
file transfer.
iPod when it is
station in the
Universal Dock for
iPod/iPhone
(YDS-10).
Status message
Cause
Insufficient Data
Tag data is not saved because of
invalid data.
Tag Already Stored
Tag data for the same content has
been already saved.
Tag Storage full
Tag data cannot be stored because
the internal memory of this unit is
full.
iPod full
Tag data cannot be stored on your
Tags cannot be
iPod/iPhone because the HDD
stored
space of your iPod/iPhone is full.
Transferring Failed
Tag data cannot be transferred to
your iPod/iPhone.
Storing Tag
Tag data is being stored in the
internal memory of this unit.
Transferring
Tag data is being transferred to
your iPod/iPhone.
Tag(s)Sent
Tag data has been transferred to
your iPod/iPhone.
See
Remedy
page
Use "YDS-12" or "YDS-11" to transfer tag
data from this unit to your iPod.
See
Remedy
page
The selected HD Radio program (or song
being played) does not support the iTunes
Tagging feature.
Station your iPod/iPhone in the Universal
Dock for iPod/iPhone (YDS-12) connected
to the DOCK terminal of this unit.
Delete unnecessary data from your iPod/
iPhone with iTunes to make room and try
again.
Check if the iPod/iPhone is stationed in the
Universal Dock for iPod/iPhone (YDS-12)
properly.

SIRIUS Satellite Radio™

Problem
Cause
SIRIUS Satellite
The hold function is enabled.
Radio information is
not displayed
properly.
Display
Cause
ANTENNA ERROR
The antenna is not connected to
the SiriusConnect tuner properly.
SIRIUS LOADING
This unit is communicating with
the SiriusConnect tuner.
CHECK SR TUNER
The SiriusConnect tuner is not
connected to the SIRIUS jack of
this unit correctly.
The SiriusConnect tuner is not
connected to the AC wall outlet.
NOT SUPPORTED
This unit does not support the
connected SIRIUS Satellite Radio
tuner.
ACQUIRING
The signal is too weak.
UPDATING
The SiriusConnect tuner is
updating the channel list.
The period of the subscription is
end.
F/W UPDATING
The SiriusConnect tuner is
updating the firmware.
APPENDIX
Troubleshooting
See
Remedy
page
Press
HOLD
to disable the hold function.
69
See
Remedy
page
Check the connection of the antenna and
64
SiriusConnect tuner.
The message disappears normally within
several tens of seconds.
Check the connection of the SiriusConnect
64
tuner and this unit.
Connect the power cable of the
SiriusConnect tuner to the AC wall outlet.
Connect the SiriusConnect tuner that this
unit supports,
Adjust the orientation of the antenna of the
68,
69
SiriusConnect tuner. Check the antenna
reception level from the Antenna
information on the front panel display, or
the SIRIUS Information screen on the TV
screen.
Wait until the updating is complete.
Contact SIRIUS Satellite Radio to renew the
subscription.
Wait until the updating is complete.
121
En

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents