Yamaha RX-A800 Owner's Manual page 53

■
Auto-adjusting the sound level to make
even low volumes more audible
Adaptive DRC
Input source: All input sources except MULTI CH
Adjusts the dynamic range in conjunction with the volume level
(from minimum to maximum). When you play audio at night or at
low volumes, it is a good idea to set parameter to "On."
On Adjusts the dynamic range automatically.
Off (Default) Does not adjust the dynamic range automatically.
When "On" is selected, the dynamic range is adjusted as follows.
If the volume level is low, the dynamic range is narrow.
If the volume level is high, the dynamic range is wide.
On
On
Off
Off
Input Level Input Level
Volume: low Volume: high
■
Enjoying more spatial sound fields
CINEMA DSP 3D Mode
Input source: All input sources except MULTI CH
When CINEMA DSP 3D is enabled, set whether to use sound
programs in CINEMA DSP 3D mode (☞p.
J
1 : "Adaptive DRC" is also effective when you use headphones.
J
2 : AV5-6 or AUDIO1-2 are also available when "Audio Return Channel" is on,
and the input source is used for "TV Audio Input."
■
Adjusts the vertical position of dialogues
Dialogue Lift
Input source:
Adjusts the vertical position of center sound such as dialogues
when presence speakers are used. Increasing this parameter raises
the position.
J1
If the dialog seems to come out from a lower position than the
video monitor screen, increase this parameter.
"0" (default) corresponds to the lowest position and "5" to the
highest position.
• "Dialogue Lift" can be adjusted only when the presence speakers
are available.
• You cannot move the dialog position lower than the default
setting.
45).
Configuring settings specific to an individual input source (OPTION menu)
All input sources except MULTI CH
The ideal dialog
position
Move up to the ideal
dialog position
PLAYBACK
■
Selecting the 5.1-channel signal playback
method
Extended Surround
J2
Input source: HDMI1-5, AV1-4, V-AUX
Selects whether to reproduce 5.1-channel input signals in 6.1- or
7.1-channel when surround back speakers are used.
Auto (Default) Automatically selects the most suitable decoder if a
flag for reproducing surround back channel is present,
and reproduces the signals in 6.1- or 7.1-channel.
q PLIIx Movie
Always reproduces signals in 7.1-channel using the
Dolby Pro Logic IIx Movie decoder whether or not
surround back channel signals are contained. You can
select this parameter when two surround back
speakers are connected.
q PLIIx Music
Always reproduces signals in 6.1- or 7.1-channel
using the Dolby Pro Logic IIx Music decoder whether
or not surround back channel signals are contained.
You can select this parameter when one or two
surround back speakers are connected.
EX/ES
Automatically selects the most suitable decoder for
input signals whether or not the flag for reproducing
surround back channel is present, and always
reproduces signals in 6.1-channel.
Off Always reproduces original channels whether or not
the flag for reproducing surround back channel is
present.
53
En