Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Sim2 Manuals
  4. Projector
  5. ULTRANERO4
  6. User manual

Sim2 ULTRANERO4 User Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
ULTRANERO4
ULTRANERO4
2025-2028
2025-2028
User Guide
SIM2 Multimedia Srl

Advertisement

loading
Need help?

Need help?

Do you have a question about the ULTRANERO4 and is the answer not in the manual?

Questions and answers

Related Manuals for Sim2 ULTRANERO4

Summary of Contents for Sim2 ULTRANERO4

  • Page 1 ULTRANERO4 ULTRANERO4 2025-2028 2025-2028 User Guide SIM2 Multimedia Srl...
  • Page 2 The ULTRANERO4 25-28  features the advanced HDR video processing that made all the SIM2 projectors famous in the home cinema community. For SIM2, Home Cinema is not only a business, but even more so a passion: it is what our company was founded on.

  • Page 3: Table Of Contents

    Adjusting the Projection Image Shift Adjusting the Projector’s Zoom and Focus Adjusting the Projector Position Remote Setup USING THE PROJECTOR Powering On / O the Projector Menu Navigation and Features OSD menu tree Image Menu Display Menu Device Setup Menu Ultranero4 User Guide...

  • Page 4: Important Safety Instruction

    > Please do not open or disassemble the projector as this may cause electric shock. > Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call SIM2 Multimedia local Dealer before you send the unit for repair.
  • Page 5 Things placed in front of the lens may overheat and burn or start a fire. >Do not spray flammable gas to get rid of dust and dirt that accumulate in the lens. Doing so could cause a fire. Ultranero4 User Guide...

  • Page 6: Laser Radiation Safety Information

    >Notice is given to the user to avoid the use of optical aids such as binoculars or telescopes inside the beam. CAUTION: Use of controls, adjustments, or performance of procedures other than those specified herein may result in hazardous radiation exposure. Ultranero4 User Guide...

  • Page 7: Product Safety Labels And Location

    Product Safety Labels and Location >Specification label >Warning label >Warning label >3D Safety Information Please follow all warnings and precautions as recommended before you or your child use the 3D function. Ultranero4 User Guide...

  • Page 8: Cleaning The Lens

    >Use a special cloth for cleaning lens and gently wipe the lens. Do not touch the lens with your fingers. >Do not use alkaline/acid detergents or volatile solvents such as alcohol for cleaning lens. If the lens is damaged due to the cleaning process, it is not covered by the warranty. Ultranero4 User Guide...

  • Page 9: Copyright

    >Reorient or relocate the receiving antenna. >Increase the separation between the device and receiver. >Connect the device into an outlet on a circuit dierent from that to which the receiver is connected. >Consult the dealer or an experienced radio/television technician for help. Ultranero4 User Guide...

  • Page 10: Notice: Shielded Cables

    >Radio Equipment Directive 2014/53/EU (if product has RF function) >RoHS Directive 2011/65/EU WEEE Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle it. Ultranero4 User Guide...

  • Page 11: Introduction

    The warranty card is only supplied in some specific regions. Please consult your dealer for detailed information. Standard Accessories Note: (*)The remote control requires two AAA batteries. See “Install/Replacing Remote Control Batteries” on page 23 for more information. Ultranero4 User Guide...

  • Page 12: Product Overview

    Product Overview Note: >Do not block projector intake and exhaust vents. >When operating the projector in an enclosed space, allow at least 500mm (19.69”) clearance around the intake and exhaust vents. No. Item No. Item Ultranero4 User Guide...

  • Page 13: Connections

    INTRODUCTION Connections Note: 1. These are just a few examples of what you can connect. 2. There may be more options available for each port. 3.5mm TRS type. 3. Not recommended for charging a cell phone. Ultranero4 User Guide...

  • Page 14: Keypad

    INTRODUCTION Keypad Ultranero4 User Guide...

  • Page 15: Remote Control

    Shutter OPEN/CLOSED (toggle) F1 Functional Key F2 Functional Key F3 Functional Key Aspect Auto Adaptive Contrast Display Mode 14,16,17, Arrows for Menu 18,20 Menu Info Light Re-Sync HDMI 1 HDMI 2 Not used HDbaseT input Not used Ultranero4 User Guide...

  • Page 16: Setup And Installation

    IR Receiver Cable (3.5mm TRS type) 3. HDMI Cable 8. Audio Out Cable 13. RJ-45 Cable 4. HDMI Dongle 9. Power Cord 14. USB (A to B) Cable 5. USB (A to A) Cable 10. RS232 Cable English Ultranero4 User Guide...

  • Page 17: Adjusting The Projector Image

    The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to adjust on the underside of the projector. 2. Rotate the adjustable foot clockwise or counterclockwise to raise or lower the projector. Ultranero4 User Guide...

  • Page 18: Adjusting The Projection Image Shift

    Lens shift is generally expressed as a percentage of the image height or width, see below illustration. Vertical / Horizontal Lens Shift When the lens is shifted to the left most, Horizontal can be adjusted left/right +/- 22%  and Vertical can be adjusted up/down +/- 50% : Ultranero4 User Guide...
  • Page 19 When the lens is shifted to the rightmost:   Ultranero4 User Guide...
  • Page 20 V: Height of the projected image. f) H: Width of the projected image. g) Projected image. h) When the lens is shifted beyond the described range of operation, screen edges may become darker or image may become out of focus. Ultranero4 User Guide...

  • Page 21: Adjusting The Projector's Zoom And Focus

    By using key 5 you can select the Focus menu Press the buttons until the image is sharp and legible. By using key 7 you can select the Zoom menu Press buttons until the image reaches the required size. Ultranero4 User Guide...

  • Page 22: Adjusting The Projector Position

    When installing multiple projectors, keep at least 1000mm (39.4”) space between the adjacent projectors. >For ceiling/wall mount installations, make sure to leave 15 mm (0.6”) between the ceiling mount and the bottom intake vents of the projector. Ultranero4 User Guide...

  • Page 23: Remote Setup

    >If you will not be using the remote control for an extended period of time, remove the batteries. >When you dispose of the batteries, you must obey the law in the relative area or country. Ultranero4 User Guide...
  • Page 24 >When you aim at the screen, the eective distance is less than 5 m from the remote control to the screen and reflecting the IR beams back to the projector. However, the eective range might change according to screens. Ultranero4 User Guide...

  • Page 25: Using The Projector

    Turn on the projector by pressing button on the projector keypad or the “ ” on the remote control. During start-up the power LED is flashing red and during normal operation, the power LED is solid green. Ultranero4 User Guide...
  • Page 26 “Auto Power o (min.)” menu in “Device Setup g Power Settings”. If you want the projector to enter standby mode instead, disable auto power o and set the sleep time interval in “Device Setup=> Power Settings =>Sleep Timer (min.)”. Ultranero4 User Guide...

  • Page 27: Menu Navigation And Features

    -To select a function option, use the buttons to make the selection. If no Enter icon shows at the navigation bar, the highlighted option is automatically applied. If there is an Enter icon at the navigation bar, press Enter to confirm your selection. Ultranero4 User Guide...
  • Page 28 Color Settings Color     0 ~ 100 Tint 0 ~ 100 Brilliant Color     0 ~ 10 Color Temperature             Color Settings   0 ~ 254 Saturation 0 ~ 254 Ultranero4 User Guide...
  • Page 29 Cancel (default) Blue   0 ~ 254 Saturation 0 ~ 254 Luminance   0 ~ 254 Reset   Cancel (default) Cyan   0 ~ 254 Saturation 0 ~ 254 Luminance   0 ~ 254 Reset   Cancel (default) Ultranero4 User Guide...
  • Page 30 Light Green Light Blue       Pink       Gray   3D Setup 3D Mode O [default]       Auto 3D Sync Type     DLP-link [default]       3D Sync 3D Format Auto Ultranero4 User Guide...
  • Page 31     Frame Sequential 3D Sync Invert O [default]       3D Sync Out To Emitter [default]     To Next Projector   Reset         Cancel [default] Reset       Cancel [default] Ultranero4 User Guide...
  • Page 32 (Adjust Pattern) Grid Color Green [default]     Magenta       Cyan Reset     Cancel [default]     Edge Mask       0 ~ 10 [default: 0] Reset           Cancel [default] Ultranero4 User Guide...
  • Page 33 Deutsch Français       Italiano Español       Português Polski       Nederlands Norsk 繁體中⽂       简体中⽂ ⽇本語       한국어       Русский Magyar ไทย         Ultranero4 User Guide...
  • Page 34 [Pattern for adjust] Lens Calibration           Cancel [default] Lens Shift Save Memory Memory Memory 1 ~ Memory 5 Apply Memory   Memory 1 ~ Memory 5 Clear Memory         Cancel [default] Ultranero4 User Guide...
  • Page 35     O         On [default] Startup Logo Change Logo     Default     Neutral     Background Color None       Blue       Green Grey       White Ultranero4 User Guide...
  • Page 36     HDBaseT EDID Settings HDMI 1 EDID     1.04       2.0 [default] HDMI 2 EDID     1.04       2.0 [default] HDBaseT EDID     1.04       2.0 [default] Ultranero4 User Guide...
  • Page 37 Projection Orientation     Light Source Mode Freeze Screen     Network setup       Reset Selective User2 HDMI 1     HDMI 2 Color Matching     Color Temperature Projection Orientation     Light Source Mode Ultranero4 User Guide...
  • Page 38     O     On [default]   Telnet     O     On [default]   HTTP     O     On [default]     Baud Rate       9600       19200 Ultranero4 User Guide...
  • Page 39 Eco Mode     Custom Power Ambient Temp.       System Temp.     Control Crestron Extron     PJ Link     Telnet HTTP       LAN Interface MAC Address     Network Status Ultranero4 User Guide...
  • Page 40   IP Address Subnet Mask     Gateway DNS 1     DNS 2       FW VERSION Main Version F-MCU Version     A-MCU Version LAN Version     Formatter Version HDBaseT Version     Ultranero4 User Guide...

  • Page 41: Image Menu

    >cinema_Provides the best balance of detail and colors for watching movies. >LCC_Standardized accurate color by using LCC application (SIM2). >bright_This mode is suitable for environments where extra-high brightness is required, such as using the projector in well-lit rooms.

  • Page 42: Dynamic Range

    >1.8 / 2.0 / 2.4 Select a preset gamma value to adjust the image performance. In general, the smaller the value, the brighter the dark areas of the image will become. The standard gamma value is 2.2. Ultranero4 User Guide...

  • Page 43: Dynamic Contrast

    The value can be adjusted from 0% to 5%, with 0 being the darkest black and 5 being the brightest. Note: . When Dynamic Black is turned on, the Extreme Black will be unavailable. . When Extreme Black is turned on, the Dynamic Black will be unavailable. Ultranero4 User Guide...

  • Page 44: Color Setting

    Temperature will be unavailable. WALL COLOR Set the wall color of the projector to achieve best color performance for a specific wall. The available options are O, Blackboard, Light Yellow, Light Green, Light Blue, Pink, and Gray. Ultranero4 User Guide...
  • Page 45 . To enable 3D mode, the input frame rate should be set to 60Hz only, lower or higher frame rate is not supported. . To reach the best performance, resolution 1920x1080 is recommended, please note that 4K (3840x2160) resolution is not supported in 3D mode. >Reset Reset all the image settings to factory default values. Ultranero4 User Guide...

  • Page 46: Display Menu

    (1080p120Hz). All geometric correction settings (example: Keystone, Four Corners) will be disabled when Gaming Mode is enabled. For more information is below. Note: . The input lag by signals is described in the following table: . The values in the table can vary slightly. Ultranero4 User Guide...

  • Page 47: Aspect Ratio

    Adjust the projected image position. >Horizontal Use the buttons to adjust the projected image position horizontally. >Vertical Use the buttons to adjust the projected image position vertically. Note: When 3D mode is selected, the Image Shift will be unavailable. Ultranero4 User Guide...

  • Page 48: Geometric Correction

    For the best use of digital V and H digital keystone adjustment, projection lens Vertical and Horizontal shift must be set in the centre. To centre the lens go to LENS SETTIGS-LENS CALIBRATION (this calibrates the lens position to return it to the centre) Ultranero4 User Guide...
  • Page 49 You can use this function to remove the video encoding noise on the edges of the video images. Note: When 3D mode is turned on, the Edge Mask will be unavailable. >Reset_Reset all the display settings to factory default values. Ultranero4 User Guide...

  • Page 50: Device Setup Menu

    Simplified Chinese, Japanese, Korean, Russian, Hungarian, and Thai. MENU SETTING >Menu Location_Select the menu location from Top Left, Top Right, Center, Bottom Left, and Bottom Right. Note: Due to the limitation of hardware, the update of Bottom Left & Right OSD will become slower. Ultranero4 User Guide...

  • Page 51: High Altitude

    Press the t and u buttons to add or reduce time, 1 minutes for each press. >Sleep Timer (min.)_Set an interval timer for the projector to automatically turn o after operating for the specified amount of time. Ultranero4 User Guide...
  • Page 52 Sleep Timer, and Security Timer, an on-screen message will pop up warning that the projector shuts down in 60 seconds. Press any button on the remote control or projector keypad to reset the timer and the projector remains on. Ultranero4 User Guide...

  • Page 53: Background Color

    1. When new updates are automatically downloaded, there will be no prompts. 2. When the Power O button is pressed, if the download is complete, a prompt to update will pop up 3. Select the Update option to start the update. >Update_Manually update the system firmware. Ultranero4 User Guide...

  • Page 54: Input Settings Menu

    EDID compatibility to display the signal correctly. Select 1.4 for the input devices with HDMI 1.4, or 2.0 for HDMI 2.0 devices. >HDMI Out_Set the HDMI 1 or HDMI 2 port to output the signal. >Reset_Reset all the input settings to factory default values. Ultranero4 User Guide...

  • Page 55: Audio Menu

    . HDBaseT Control . Control . Baud Rate DEVICE ID Assign an ID code for the projector from 00 to 99. Use this code as the projector ID when controlling the projector by RS232, Telnet or other control methods. Ultranero4 User Guide...
  • Page 56 Setup Apply to save the modifications. Note: Crestron settings on the OSD only support Crestron V1 functions. If you want to configure Crestron V2 functions or more detailed settings, you need to go to the web page to set them. Ultranero4 User Guide...
  • Page 57 >LAN_RJ45 function_For simplicity and ease of operation, the projector provides diverse networking and remote management features. The LAN / RJ45 function of the projector through a network, such as remotely manage: Power On / O, brightness, and contrast settings. Ultranero4 User Guide...
  • Page 58 When network is not available, refer to “Directly connect the projector to a computer” on page 58. >Directly connect the projector to a computer_When network is not available, connect the projector to the computer directly using a RJ-45 cable, and configure the network settings manually. Ultranero4 User Guide...
  • Page 59 ± Minimum delay for next RS232 command must be more than 200 (ms).Information menu. BAUDE RATE Set the baud rate for Serial Port In and Serial Port Out. The available options are 9600, 19200, 38400, 57600, and 115200 (default). >Reset_Reset all control settings to default factory values. Ultranero4 User Guide...

  • Page 60: Information Menu

    -Eco Mode_Displays the total laser usage time of the projector in Eco mode. >Custom Power_Displays the total laser usage time of the projector in Custom Power mode. >Ambient Temp._Display the current ambient temperature of the projector. >System Temp._Display the current system temperature of the projector. Ultranero4 User Guide...
  • Page 61 >Subnet Mask_Display the current Subnet Mask of the projector. >Gateway_Display the current Gateway of the projector. >DNS 1/ DNS 2_Display the current DNS1 and DNS2 address of the projector. FW Version_Display the projector Main, F-MCU, A-MCU, LAN, Formatter, HDBaseT firmware version information. Ultranero4 User Guide...

  • Page 62: Compatible Resolutions

    COMPATIBLE RESOLUTION Digital Ultranero4 User Guide...
  • Page 63 True 3D video compatibility Note: If 3D input is 1080p@24Hz, the DMD should replay with integral multiple with 3D mode. Ultranero4 User Guide...

  • Page 64: Rs232 Signals Connection

    RS232 SIGNALs CONNECTION Computer COM Port Projector COM Port (D-Sub 9-pin connector) (D-Sub 9-pin connector) Note: RS232 shell is grounded. RS232 PORT SETTING AND SIGNAL CONNECTION RS232 Port Setting For RS232 protocoll please contact your Dealer. Ultranero4 User Guide...

  • Page 65: Image Size And Projection Distance

    IMAGE SIZE AND PROJECTION DISTANCE The size of projected images is 50 ~ 300 inches (1.36 ~ 13.35 m) Ultranero4 User Guide...

  • Page 66: Ceiling Mount Installation

    CEILING MOUNT INSTALLATION 1. To prevent damage to your projector, please use the SIM2 ceiling mount, ULTRANERO4 BRK-MB. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following specifications:...

  • Page 67: Ir Remote Codes

    IR REMOTE CODES Rev. Date Software Description of Change Version 18 December 2024 Initial version. The IR formatting timing chart is conforming the NEC coding standard Ultranero4 User Guide...

  • Page 68: Led Indicators And Lightning Messages

    LED INDICATORS AND LIGHTING MESSAGES Note: The light o for 10min when projector into upgrade process and All LED Flashing (3 sec o/ 3 sec on) Ultranero4 User Guide...

  • Page 69: Specifications

    • 1 x RS232 (D-sub 9 pin) for control communications • 1 x Front IR receiver • 1 x Top IR receiver • 1 x 3.5mm TS type mini jack - 12V, 200mA ±10%, Triggers output • 1 x Wired IR receiver Ultranero4 User Guide...
  • Page 70 • Dimensions (W x H x D): 483 x 178 x 433 mm • Weight: 14,8 Kg • Package type: double box with anti-shock filling for safe shipments Note: All specifications are subject to change without notice. Ultranero4 User Guide...

  • Page 71: Mechanical Drawings

    MECHANICAL DRAWINGS Note: Holes on  point 1 are for ceiling installation; VESA 140X170. Ultranero4 User Guide...
  • Page 74 Email: info@sim2.it www.sim2.com SIM2 USA Inc. 10216 NW 47th Street Sunrise, FL 33351 Phone: +1 (954) 442 2999 Email: sales@sim2usa.com www.sim2usa.com SIM2 BRIONVEGA CO., Ltd Room 303-304, No. 244 Liaoning Road Shanghai 200080 - CN Phone/Fax: 86 1 62881991 Email: infochina@sim2.com...