Do c u Co lo r 70 0 0/ 80 0 0 P r od u c ti v i ty K it S u p pl e me n t
Pr od uc t i v i ty K i t S up p le m en t
Running all weights at rated speed may result in a
Cross Process Low Gloss Band; refer to the
illustration shown on the left.
On the heavy-weight stocks, this low gloss band
defect starts approximately five inches (127 mm)
from the lead edge and is approximately three
inches (76 mm) wide.
On light-weight stocks, the defect starts
approximately six inches (152 mm) from the lead
edge and is approximately two inches (50 mm)
NOTE: If this defect occurs, return the Productivity
Setting to the Single Paper Weight setting. If the
defect still occurs after running another print, call
your Xerox service representative for further