Headset Operation - VTech t2455 User Manual

Headset Operation

Headset Jack
You can use this telephone handsfree when you install any VTech 2.5mm headset,
purchased separately.
Plug the headset into the jack located on the right side of the Handset (under the
small rubber flap). Do not force the connection, but make sure the plug fits securely.
Belt Clip
Attach the Belt Clip to the cordless Handset (optional).
NOTE: Install the Base Unit away from electronic equipment, such as personal
computers, television sets or microwave ovens. Avoid excessive heat, cold, dust
or moisture.
91-005650-040-000t2455.p65
31
31 7/21/2004, 3:52 PM