UTStarcom XV6600 User Manual page 97

If your company's proxy server doesn't authenticate users, then you
may be able to leave the username and password fields blank.
Click Ok.
4
For the proxy settings to take effect, you must restart the Monitor.
5
a) Right-click the Wireless Sync icon in the system tray again and choose Exit.
b) Launch the Monitor by clicking the
Programs → Wireless Sync
Upgrading Your Wireless Sync Software
Point your web browser to
1
You will be asked to log in. Type your user name (this will be your 10 digit
2
Mobile Number, e.g. 4044550001) and your permanent VTEXT password.
Select the Setup
3
click Account. This will bring you to the screen below:
Update Software
Click the
4
Click the Install
5
will update any Wireless Sync software on your machine.
PC Monitor
If your PC Monitor is running on this computer, it will be upgraded by the
installation wizard.
If your PC Monitor and your XV6600 were installed from separate computers, you will
need to execute these installation steps from both computers.
Start
→ Wireless Sync Client.
http://www.wirelesssync.vzw.com
menu in the top right hand corner of the web page, and then
link in the middle of the web page.
button and follow the subsequent installation wizard. This
XV6600 User Manual
button. Then navigate to
89