UTStarcom XV6600 User Manual page 106

98 XV6600 User Manual
Αll the services can be individually configured by tapping the
Bluetooth icon on the lower-right corner of
Bluetooth Settings
In the
1
configured.
In the
2
options by checking the
Service Security Settings
Each Bluetooth
tings. Even though the options are the same for each service,
in each case they are specific to the individual service being
configured.
In the Service settings
Bluetooth icon in the lower-right corner of
Bluetooth Settings:
Authorization required
1
When enabled, your XV6600 will require
that each attempt to establish a connection
be individually authorized on the pop up
Authorization Request
must authorize each connection, when a remote
device attempts to connect to this service.
Authentication (Passkey) required
2
When enabled, a passkey or a
required from the remote device before allowing
the connection.
A passkey is a code you enter to authenticate
connections requested by other devices. This
passkey must be known and used by both parties,
otherwise, the connection will not be allowed.
→ Services tab.
Services field, select the service to be
Service settings
area, enable the desired
Enable service
service has its own individual security set-
area of the Services
screen; that is, you
Today screen →
box.
2
tab, tap the
Today screen →
1
Link Key is
2
1
3
4