UTStarcom XV6600 User Manual page 116

108 XV6600 User Manual
8.1 E-mail Messages: Using Messaging
You can set up a connection to an e-mail server so that you can send and receive e-mail
messages by using a modem or network connection and Inbox on your device.
The ISP or network must use a
gateway.
You can use multiple e-mail services to receive your messages. For each e-mail service
you intend to use, first set up and name the e-mail service. If you use the same service
to connect to different mailboxes, set up and name each mailbox connection.
To set up an e-mail service:
Open
1
Follow the directions in the
Fill in your e-mail address then tap Next.
2
Tapping
XV6600 to your e-mail server and automatically download the necessary e-mail
connection settings.
If
n
receiving e-mail.
If auto-configuration
n
settings.
Enter
3
From the drop down menu select the
4
supports
Enter a
5
Messaging on your device, then tap
Next will initiate auto-configuration,
auto-configuration is successful, you can immediately begin sending/
is unsuccessful, you will need to manually enter the
Your name, User name
(POP3 or IMAP4).
Name for your e-mail account then tap Next.
POP3 or IMAP4 e-mail server and an
Accounts
New Account Wizard.
which attempts to connect your
and Password, then tap Next.
Account type
SMTP
→ New Account.
that your e-mail provider