UTStarcom XV6600 User Manual page 104

96 XV6600 User Manual
c. To Save configuration settings in a profile:
When you make changes to the XV6600's configuration, those changes are automati-
cally saved when you select a different profile, turn
XV6600.
In the
1
Add,
Select the desired profile from the
2
tab.
Setup your XV6600 including the necessary settings in
3
Services
Tap OK and then close the Bluetooth Settings screen; the changes are saved
4
automatically.
To avoid saving unwanted changes to a regularly used profile, create a new
profile that is based on the profile currently in use, select the new profile, and
then make the changes while the new profile is active.
Setting Accessibility Properties
You can enter or change the accessibility properties to define how your XV6600 interacts
with other Bluetooth
Today screen →
Enter the
1
when the associated profile is active if the
Bluetooth
If the
2
the name assigned to your XV6600 (by tapping
tab
to the remote user as the Bluetooth name of your XV6600.
General
tab → tap the icon
Rename and Delete a profile.
tab described later so that it behaves in your desired manner.
devices by tapping the
Bluetooth Settings →
Bluetooth name of your XV6600, as displayed to remote devices
checkbox is un-checked.
Use Pocket PC device name for Bluetooth
→ About → Device ID
Bluetooth
to access a screen from which you can
Current Profile
Bluetooth icon on the lower-right corner of
Accessibility tab.
Use Pocket PC device name for
tab → Device Name) will always be displayed
off, or shut down your
field on the General
Accessibility and
checkbox is checked,
→ Settings → System