UTStarcom XV6600 User Manual page 18

10 XV6600 User Manual
2.1 Starting Up
Screen Tapping, Calibration and
Re-calibration
When you first start up your XV6600, you will be asked to
calibrate the screen by tapping the center of a cross with your
stylus as it moves around the screen. This process ensures
that when you tap the screen with your stylus the item tapped
is activated.
To re-calibrate the screen:
If your device does not accurately respond to screen taps, you
will need to re-calibrate it.
Tap
Tap the
2
to re-calibrate the screen as described above.
When aligning the touch screen, tap the target
firmly and accurately.
Screen Orientation
To switch the orientation of your LCD screen between Portrait
and Landscape mode if needed, you can select the
options by tapping
This helps to get a better view or a better operation interface
when running certain programs on your XV6600. Long blocks
of text may be easier to read using Landscape orientation.
For easier reading of text in programs that support ClearType,
tap the ClearType
To increase readability or see more content by adjusting the
size of text in programs that support it, tap the
and then use the slider to make text larger or smaller.
→ Settings → System
Align Screen button on the
→ Settings → System
tab, and then select Enable
tab → Screen.
General tab
Orientation
tab → Screen.
ClearType.
Text Size tab,