audium Comp 3.2 Active User Manual page 12

Drive Loudspeakers:
Connecting to a (Tube-)Amplifier:
Through the active subwoofer in the AUDIUM Drive Speakers, most of the work (for
playing the bass signals) is transferred from the amplifier the speakers. The (tube-)amplifier
can thus concentrate fully on the reproduction of the detailed information which is
reproduced via the fullrange-drivers.
Note
:
Again, the basic principle applies: a chain is never stronger than its weakest link. Therefore
do not try to think too cost-effective when choosing the speaker cables. save you They
need to transfer all the music information from the amplifier to the speakers.
Note:
Probably also use a multiple socket outlet. Insert the two power supplies of the speakers in
the first two outlets near the connection cable. Do not use extra filtered power outlet
outputs. The power supplies have already integrated line filters.
Too much network filtering has a bad effect on the sound quality.
- 12 -