Advertisement
Quick Introduction to AUDIUM Air! (AccessPoint-Mode)
Connecting the speakers:
Connect the OUT from the Master with the IN from the Slave with the supplied digital cable, and then connect the Power-
Supplies to the DC Inputs. The Master is booting, and after this shows the status screen:
Master:
This symbol
indicates that the Speaker is in AP (Access-Point) Mode. What means it creates an own WLAN.
Now take your iPhone, iPad, Mac, or PC-Notebook and connect to this WLAN. It is calles AUDIUM-AIR-WLAN-xxxx.
There is no key neccessary to connect to it since it is an open WLAN. After this, use direct AirPlay Streaming or select the
speakers as output device in iTunes on your PC:
Here it is shown on the iPhone:
Select WLAN
Go To Status
The Master has 4 Connectors:
IN 1 = coax SPDIF Input
IN 2 = optical mini TosLink Input
OUT = coax SPDIF Output
DC Input = Power Supply
Select AirPlay
Playback via AirPlay
The Slave has 3 Connectors:
IN = coax SPDIF INPUT
OUT = coax SPDIF Output
DC Input = Power Supply
Slave:
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for audium Air Series: Comp 3 Air
Summary of Contents for audium Air Series: Comp 3 Air
- Page 1 Speaker is in AP (Access-Point) Mode. What means it creates an own WLAN. Now take your iPhone, iPad, Mac, or PC-Notebook and connect to this WLAN. It is calles AUDIUM-AIR-WLAN-xxxx. There is no key neccessary to connect to it since it is an open WLAN. After this, use direct AirPlay Streaming or select the...
- Page 2 Quick Introduction to AUDIUM Air! (With Digital Inputs) Active Inputs are selected automatically according to a Priority (this can be changed in the Air Setup Menu). Prio 1: AirPlay, Prio 2: SPDIF Input, Prio 3: TosLink Input To adjust the volume, install a UPnP/DLNA App of your choice from the AppStore – we recommend „mconnectFree“, „mconnect“...
Need help?
Do you have a question about the Air Series: Comp 3 Air and is the answer not in the manual?
Questions and answers