audium Comp 3.2 Active User Manual page 10

Connecting the speakers:
After placing the speakers in the desired location, connect them to your music source.
Depending on whether Active or Drive Speaker, this is done as follows:
Active Speakers
Connect the speakers with high-quality RCA cables with the line-out of your preamp or the
audio output of your computer. Lead the left line out of the preamp to the left speaker and
the right line out to the right speaker.
Connecting to a Preamp or a Streamer:
This is the standard use case: A preamplifier, a DAC or a streamer with integrated volume
control feeds the AUDIUM Actives with music signal.
In the case of a Comp 8 or 9 , we recommend using XLR cables for cable lengths over 3m.
.3 .3
This type of connection is more resistant to interference in the music signal.
Depending on the desired cable connection, select Line-In or XLR-In using the input selector
switch (6).
- 10 -