Advertisement
Installation Instructions
Symbio™ 700 Customer
Connection Module
Model Number:
Used With:
Foundation™ with Symbio™ 700 Controls
BAYSCCM001*
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning equipment
can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person could result in death or
serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that are attached to the equipment.
September 2024
SAFETY WARNING
ACC-SVN295A-EN
Advertisement
Table of Contents
Related Manuals for Trane Symbio 700 BAYSCCM001 Series
Summary of Contents for Trane Symbio 700 BAYSCCM001 Series
- Page 1 Installation Instructions Symbio™ 700 Customer Connection Module Model Number: Used With: Foundation™ with Symbio™ 700 Controls BAYSCCM001* SAFETY WARNING Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning equipment can be hazardous and requires specific knowledge and training.
-
Page 2: Warnings, Cautions, And Notices
(HCFCs). Not all refrigerants containing these compounds bump cap, fall protection, electrical PPE and arc have the same potential impact to the environment. Trane flash clothing). ALWAYS refer to appropriate advocates the responsible handling of all refrigerants. - Page 3 This document and the information in it are the property of Trane, and may not be used or reproduced in whole or in part without written permission. Trane reserves the right to revise this publication at any time, and to make changes to its content without obligation to notify any person of such revision or change.
-
Page 4: General Information
General Information This kit is only used with ventilation override remote 2. Check carefully for shipping damage. If any damage is minimum position, external auto/stop features, and alarm found, report it immediately, and file a claim against the indicator. transportation company. Inspection 1. -
Page 5: Installation
Installation WARNING 5. On the Customer Connection module, set the address rotary switches to 78. This is required to integrate the Hazardous Voltage! Customer Connection module with the Symbio™ Failure to disconnect power before servicing could controller. After installation is complete, the Symbio™ result in death or serious injury. - Page 6 Notes ACC-SVN295A-EN...
- Page 7 Notes ACC-SVN295A-EN...
- Page 8 For more information, please visit trane.com or americanstandardair.com. Trane and American Standard have a policy of continuous product and product data improvement and reserve the right to change design and specifications without notice. We are committed to using environmentally conscious print practices.
Need help?
Do you have a question about the Symbio 700 BAYSCCM001 Series and is the answer not in the manual?
Questions and answers