Racking The Modem Distribution Panel Hp J2085 #101; Front Mounting - HP A4500A - VMEbus Single Board Computer 744 Motherboard Manual

4

Racking the Modem Distribution Panel HP J2085 #101

Racking the Modem Distribution Panel HP J2085 #101

Front Mounting

Note
22
Accessories are available for mounting MDPs in the system rack. Illustrated
below is product HP J2084A, which uses 7 EIA units. It is a metal mounting
panel, with a filler panel, which enables front mounting of up to five Modem
Distribution Panels in the system rack. An alternative product, HP J2087A,
enables front or rear mounting of up to 5MDPs (with no filler panel).
1 Attach the mounting panel to the rack using 4 screws from your rack kit.
The panel is correctly oriented when the cable-access slots are towards the bottom of
the panel.