Vpn Tunnel Control; Activating A Vpn Tunnel - NETGEAR DG834Gv4 - 54 Mbps Wireless ADSL Firewall Modem Reference Manual
Adsl2+ modem wireless router
Hide thumbs
Also See for DG834Gv4 - 54 Mbps Wireless ADSL Firewall Modem:
- Reference manual (6 pages) ,
- Datasheet (2 pages) ,
- Configuration manual (7 pages)
Table of Contents
Advertisement
VPN Tunnel Control
Activating a VPN Tunnel
There are three ways to activate a VPN tunnel:
•
Use the VPN Status screen.
•
Activate the VPN tunnel by pinging the remote endpoint.
•
Start using the VPN tunnel.
Note: See
"Using Auto Policy to Configure VPN Tunnels" on page 6-32
about how to enable the IKE keepalive capability on an existing VPN tunnel.
Using the VPN Status Page to Activate a VPN Tunnel
To use the VPN Status screen to activate a VPN tunnel:
1. Log in to the modem router.
2. On the main menu, select VPN Status. The VPN Status/Log screen displays:
Figure 6-29
Virtual Private Networking
ADSL2+ Modem Wireless Router DG834G Reference Manual
v2.0, September 2007
for information
6-25
Advertisement
Table of Contents
Troubleshooting
