NETGEAR DG834Gv4 - 54 Mbps Wireless ADSL Firewall Modem Reference Manual page 98

ADSL2+ Modem Wireless Router DG834G Reference Manual
c. In the Select Phase 1 Negotiation Mode section of the screen, select the Main Mode radio
button.
4. Configure the VPN client identity.
In this step, you provide information about the remote VPN client PC. You must provide the
pre-shared key that you configured in the DG834G v4 and either a fixed IP address or a fixed
virtual IP address of the VPN client PC.
a. In the Network Security Policy list on the left side of the Security Policy Editor window,
click My Identity.
Figure 6-11
b. In the Select Certificate drop-down list, select None.
c. Select IP Address in the ID Type drop-down list. If you are using a virtual fixed IP
address, enter this address in the Internal Network IP Address field. Otherwise, leave
this field empty.
d. In the Internet Interface section of the screen, select the adapter that you use to access the
Internet. If you have a dial-up Internet account, select PPP Adapter in the Name field. If
you have a dedicated cable or DSL line, select your Ethernet adapter. If you will be
switching between adapters or if you have only one adapter, select Any.
6-12
v2.0, September 2007
Virtual Private Networking