C.E.C. CD5 Owner's Manual page 15

Programmed CD Playback - continued -
Deleting programmed tracks
□ All tracks: to clear the entire program, hold down
the CLEAR button for more than 2 seconds.
□ One track: to clear one track from the program,
press the CHECK button repeatedly until the track
number in question is displayed, then press the
CLEAR button. Repeat this step (CHECK then
CLEAR) to remove more tracks from the program.
□ The entire program will be deleted automatically
when you open the CD door or turn the power off.
Dimmer
Display brightness can be changed in different
three levels.
Press the DIMMER key on the remote control unit
to dim the display. The display brightness will toggle
through brighter(default), off and lighter.
brighter (default)
off
lighter
During the " off " setting in CD mode
□ " OPEn " will be displayed in the lighter setting
temporarily when the CD door is open. Closing the CD
door the display will be off again automatically.
□ Pressing the FILTER button will return the display
brightness to the brighter (default) setting but no
change digital filter setting. Press the button again to
change the digital filter type.
Regardless of the current DIMMER setting it will be
returned to the default in case that the music SOURCE
or digital filter button is pressed, or the power is turned
on again.or digital filter button is pressed, or the power is
turned on again.
CD5 User's Manual
in the case of CD mode
15