C.E.C. CD5 Owner's Manual page 11

Remote Control unit - continued -
□ The remote control unit may malfunction when its
batteries are running low. Change the batteries to new
ones of the same type if this seems to be the case.
□ Upon shifting the input from CD to others or other
inputs to CD make sure to press the key correctly to
hear the click sound for switching. When you don'
t hear the click sound, it is possible that selected
music source could not be shown at display window or
brightness of display is not even upon using DIMMER
function. If this happens, press again the same source
button after moving the remote control hand set
correctly facing on display window.
Battery Installation
Remove the cover of the battery
compartment. Insert two AAA batteries
into the compartment. Make sure that
the batteries are inserted with their
positive (+) and negative (-) poles
positioned correctly, and put the cover
back on.
Battery Replacement Period
If the distance at which the remote control unit can be
used to operate CD5 seems to be decreasing, replace
both batteries with new ones.
Precaution on handling batteries
□ Never use different types of batteries together. Both
rechargeable and non-rechargeable batteries can be
used, but the two should not be used together.
□ If you will not be using the remote control unit for an
extended period of time (more than a month), remove
the batteries to prevent leakage.
□ If the batteries leak, use a cloth to wipe away the
liquid inside the battery compartment and replace the
batteries with new ones.
□ Do not heat or disassemble batteries, and never
dispose of old batteries by throwing them in a fire.
Dispose of batteries following laws in the local area.
CD5 User's Manual
11