C.E.C. CD5 Owner's Manual page 10

Remote Control unit
Buttons Function
to buttons operate
CD5 and the others work
for the other CEC products
like CD transport TL2N,
D/A converter DA5 and so
on. Here referes to CD5
function only.
DISPLAY button
Press to cycle the
display through various
mode.
Each press of the
DISPLAY button cycles
the dis-play in the
following order: track
number/elapsed track
time (default display)
track number/remaining
track time total remaining time
back to track number/elapsed track time (default
display).
(default)
r
e
□ After track-32 remaining track time is not displayed,
but " - " and " - - : - - " blink alternately.
□ Total remaining time and total elapsed time will not
be displayed in the programmed playback mode
and/or repeat mode.
DIMMER button
Press to change the display brightness in different 3
levels.
Numeric Keys
Press to select a track directly for playback or to
enter a programmed playback order. To select ex.
24-track press +10 twice and then 4.
PROGRAM button
Press to enable programmed playback.Refer to
"Programmed CD Playback" on page 14 for details.
10
DISPLAY DIMMER
PROGRAM
1 2 3
CHECK
4 5 6
CLEAR
7 8 9
0
+10
DAC OUTPUT
DAC INPUT
total elapsed time
e
r
CHECK button
Press to check the order of tracks in your current
programmed setting. Refer to "Programmed CD Play-
back" on page 14 for details.
CLEAR button
Press to clear the current programmed setting. Refer
to "Programmed CD Playback" on page 14 for details.
REPEAT button
Press to repeatedly playback all the tracks on a disc.
When repeat mode is on, the display will show the
repeat indicator. Press again to cancel the repeat
mode.
D.FILTER (Digital Filter) button
Press to select a digital filter type FLAT or PULSE.
Refer to " Digital Filter " on page 13 for details.
Play/Pause button
Press to start or to pause playback temporarily.
Skip button
Jump to the previous or next track.
Search button
Press and hold the button to
quickly search through the track
being played. searches
through the track backwards,
and searches forwards.
Stop button
Press to stop playback.
CD button
Press to enter the CD mode.
Music SOURCE (USB2, COAX and TOS2) buttons
Press to select an external music source USB,
COAX or TOS.
Precaution on handling the remote control
unit
□ When operating the remote control, point it towards
the remote sensor on the front panel.
□ Make sure nothing is blocking the front panel where
the remote sensor is located.
□ Avoid exposing the remote sensor on the front panel to
direct sunlight or other light sources, as such exposure
can cause malfunction.
DAC OUTPUT