Using Topaccess To View And Export The Setting Code; Requirements - Sharp AR-P15 Service Manual

22

Using TopAccess to view and export the Setting Code

Using TopAccess to view and export the Setting Code
The Maintenance page of TopAccess enables you to view the Setting code and to export
the Setting code as an XML file. This section includes three procedures:
• "To access the URL for Maintenance" on page 23
• "To view the Setting Code" on page 24
• "To export the Setting Code as an XML file" on page 25

Requirements

In order to use TopAccess, make sure the AR-P15 is connected to the network and has a
valid IP address (see page 16). Also make sure the PC meets the following additional
requirements:
• Web browser—either Netscape Communicator v4.5 or later (with Java enabled) or
Microsoft Internet Explorer v4.0.1 with SP1 or later (with Java enabled)
Use the specified versions for best results. Web browsers offer frequent updates,
N :
OTE
therefore, support for TopAccess cannot be guaranteed for every update.
• Monitor—video memory and monitor driver support for 16-bit color and a resolution
of 800 x 600 pixels, minimum
• Network configuration—TCP/IP connection to the network that has the AR-P15 as a
node.