Data Transfer - Sharp ARFX13 - Fax Interface Card Operation Manual

DATA TRANSFER

If there is a problem with the machine, you can use the Data Transfer function to have received faxes read into
memory and then sent to a different fax machine for printing.
This function is used when you cannot print received faxes, for example when the machine runs out of toner, or a
misfeed occurs.
To use this function, the fax number of the transfer destination machine must be programmed.
Your fax machine
Enter the fax number of
the fax machine your
want to transfer the data to.
[Preparation]
Transfer is only possible when a received fax is being held in memory because printing was not possible. In this
Note
case, "0:RX DATA TRANSFER" will appear in the display.
Follow these steps to program the fax number of the transfer destination machine:
1
Press the [MENU] key.
1,2,3,
1,2,3,
SP. FUNC
2
Press the [ ] key (
until "0:RX DATA TRANSFER"
appears, and then press the [OK] key.
Selection
"0:RX DATA TRANSFER"
3
Press the [ ] key (
until "2:FAX NUMBER" appears, and
then press the [OK] key.
Selection
"2:FAX NUMBER"
FW. RX DATA
1=YES 2=NO
Select data transfer mode
) or [ ] key ( )
) or [ ] key ( )
Receiving fax machine
4
Enter the fax number of the transfer
destination machine with the numeric
keys and press the [OK] key.
5
Enter the name of the transfer
destination with the numeric keys and
press the [OK] key.
beep
Transferred faxes
are printed
Enter the transferring fax
number (maximum 40
digits) by pressing the
numeric keys.
67
5