Output Method When Memory Is Full; Set The Number Of Confidential Print Jobs To Be Stored - Sharp AR-PB2A Operation Manual

Output Method When Memory Is Full

When multiple sets of a document have been requested and the document memory cannot hold the
entire document, this program gives the option to print one set or multiple sets.
When the "OUTPUT METHOD WHEN MEMORY IS FULL" key is pressed, the following display will
appear.
KEY OPERATOR PROGRAMS
OUTPUT METHOD WHEN MEMORY IS
FULL
1 SET
MULTI-SET
NOTES When the document memory becomes full of print job pages, the printer will start printing the data which have
been stored in the memory. If multiple sets of the document have been requested and "MULTI-SET" is specified
with this program, the sets will be printed in blocks. Each set of printed sheets will be stacked offset from the
previous set. Finally, the printer will output a notice page unless it is prohibited with a key operator program.
This program applies only to face down delivery. See page 57 "Notes on Printing Lengthy Documents".

Set the Number of Confidential Print Jobs to Be Stored

This program is used to specify a set of the maximum number of confidential print jobs that can be
stored in the printer and the maximum number of pages in a job. In the default setting, up to 16 jobs
including up to 80 pages of A4 or 8-1/2" x 11" paper can be stored in the printer.
NOTE When the printer has any confidential print jobs, this change cannot be done. Wait until all confidential print jobs are
complete.
1. Select "1 SET" or "MULTI-SET".
2. Press the "OK" key.
OK
1. Select the desired set of the number of jobs and
the number of pages.
•
The number of pages indicates the maximum
number for A4 or 8-1/2" x 11" paper.
2. Press the "OK" key.
43
KEY OPERATOR'S GUIDE