Setting The Number Of Rings For Auto Reception - Sharp ARFX13 - Fax Interface Card Operation Manual

INITIAL SETTINGS

SETTING THE NUMBER OF RINGS FOR AUTO RECEPTION

You can set the number of rings before the machine answers in AUTO mode using the procedure below.
1
Press the [MENU] key.
1,2,3,
1,2,3,
SP. FUNC
2
Press the [ ] key (
until "4:USER PROGRAM" appears,
and then press the [OK] key.
Selection
"4:USER PROGRAM"
3
Press the [ ] key (
until "4:# OF RINGS (AUTO)" appears,
and then press the [OK] key.
Selection
"5:# OF RINGS (AUTO)"
4
Press a numeric key to select the
number of rings.
5
Press the [OK] key.
1,2,3,
1,2,3,
SP. FUNC
28
) or [ ] key (
) or [ ] key (
Select the number of
rings you would like to
use (0 to 9).
6
Press the [MENU] key.
1,2,3,
1,2,3,
SP. FUNC
)
If an external telephone is connected, the
Note
external telephone will ring one time when
auto reception is set to 0 rings.
)
Press the [MENU] key to
exit.