Page 3
Refer to our repair and calibration section at www.aemc.com/calibration. Serial #: Catalog #: 2137.53, 2137.54 / 2137.63, 2137.64 Model #: PEL 112 / PEL 113 Please fill in the appropriate date as indicated: Date Received: Date Calibration Due: Chauvin Arnoux , Inc.
Page 4
Cat. #2140.48 Cat. #2140.44 Replacement is Qty of (1) (Only Shipped with Replacement reeling box is PEL 112 Cat. #2137.53 & sold separately (Qty 1) PEL 113 Cat. #2137.54) Cat. #5000.77 Cable - USB Type A to (1) Set of (12) Color USB SD - card reader Cat.
Instruments Power & Energy Logger Thank you for purchasing an AEMC ® Model PEL 112 or Model PEL 113. The user manual is included on the provided USB Drive along with the DataView software. It is also available on ®...
Nine LEDs for status information. USB and Ethernet connectors, and SD memory card slot. Standard (IEC C7 figure 8 terminal – non polarized) power connector for 110/250 V power source. Power & Energy Logger Models PEL 112 & PEL 113 - Quick Start Guide...
(for factory service use only). ® INPUT TERMINALS Item Designation Color-coded ID Marker Insertion Locations Voltage Input Connectors (safety banana plug inputs) Current Sensor Input Connectors Power & Energy Logger Models PEL 112 & PEL 113 - Quick Start Guide...
Page 8
Clip the rings of the same color to the ends of the lead that you will be connecting to ■ the terminal. CONNECTIONS Item Designation Power Cord Connector SD-card Slot USB Connector Ethernet RJ 45 Connector Power & Energy Logger Models PEL 112 & PEL 113 - Quick Start Guide...
- Rapid blinking (10 times per second): the Ethernet controller is correctly initialized - (2) rapid blinks followed by a pause: DHCP error - Indicator lit: network initialized and ready to be used Power & Energy Logger Models PEL 112 & PEL 113 - Quick Start Guide...
Data recording sessions are stored on an SD-card. The PEL accepts SD and SDHC cards, FAT32 formatted up to a capacity of 32 GB. The PEL 112 and PEL 113 are delivered with a formatted and installed SD-card. To install a different SD-card: ■...
CONNECTING TO COMPUTER Before you can use the PEL Control Panel to communicate with your PEL 112 or PEL 113, you must establish a connection between the instrument and the computer. To begin, ensure that you have installed DataView with the PEL Control Panel.
Page 12
Open button in the Download dialog box. In both cases, the session is added to My open sessions in the tree. The data can then be displayed. Power & Energy Logger Models PEL 112 & PEL 113 - Quick Start Guide...
E-mail: repair@aemc.com Caution: To protect yourself against in-transit loss, we recommend that you insure your returned material. NOTE: You must obtain a CSA# before returning any instrument. Power & Energy Logger Models PEL 112 & PEL 113 - Quick Start Guide...
Need help?
Do you have a question about the PEL 112 and is the answer not in the manual?
Questions and answers