Specifications - Doss SoundBox X Quick Start Manual

EN
EN
1. Packing content
1 x SoundBox X
●
1 x USB-C Charging Cable
●
1 x User Manual
●

2. Specifications

Output: 10W
●
Input: DC 5V
●
Battery: 2200mAh
●
Charging time: ≤3.5H
●
Playtime: 26H (at 50% volume)
●
Bluetooth version: V5.3
●
Bluetooth range: up to 36ft
●
Net weight: 1.33 pounds
●
Unit dimension: 6.2 x 7.2 x 2 inches
●
Warranty: One-year limited
●
3. Important notes before using
To prolong the lifetime of the battery, fully charge the speaker before the
●
first time using it.
Charging Indicator: Steady red——Charging No light——Fully Charged
●
The speaker will auto-power off after 15 minutes without audio input.
●
To remove/activate the auto-power off feature, in Bluetooth disconnect,
●
press and hold the button "+" for 5s (dudu——remove; du——activate )
To remove/activate all prompt sounds, in Bluetooth disconnect, press and
●
hold the button "—" for 5s (dudu—— remove; du——activate )
If you need any assistance while using this speaker, please feel free to
●
contact customer service at support@dossav.com.
4. Buttons and control
5. Pairing your device via Bluetooth
1. Enable the Bluetooth feature on your device.
2. Find "SoundBox X" on the Bluetooth device and connect it.
3. Once paired, you can see the status "connected" on your device.
Press to re-enter Bluetooth pairing if your device can't find SoundBox X in 10
seconds.
6. TWS(True Wireless Stereo)mode
Turn on both speakers and make sure they're not in the Bluetooth mode.
1.
Press and hold "
2.
Once the pairing is successful, there will be a prompt tone and their light will
3.
be synchronization.
7. Use your speaker with the Echo Dot
You can connect the Dot to the speaker via Bluetooth.
Please follow the steps to set up via Bluetooth:
Download the Alexa app and follow the steps to set up the procedure to get
1.
the Dot connected to your home Wi-Fi network.
Switch the SoundBox X to Bluetooth mode, you can press the power button to
2.
re-enter Bluetooth pairing.
Run the Alexa app, tap Menu, and then tap Settings.
3.
Tap the Echo Dot in your list of Alexa devices, then tap Bluetooth.
4.
The SoundBox X should appear in the list of Bluetooth devices. If not, please
5.
press the power button and try again.
Once listed, tap on the speaker to complete the pairing process.
6.
To remove the device, return to Bluetooth＞tap the name of the speaker＞tap
7.
"Forget Device"
Note:
Voice command will not be able to turn on/off the speaker if you connect to it
via Bluetooth.
1A
Press and hold 2s
Press and hold 2s
Press
Press and hold 5s
Press and hold 2s
Press
Press and hold 5s
Press and hold 3s
Press
Press
Press and hold 5s
Press
Press and hold 2s
Press
Press and hold 2s
"button make two speakers enter the TWS mode.
Turn on/off
Next track
Volume up
Remove/activate auto-power off
(Only works while Bluetooth disconnecting)
Previous track
Volume down
Remove/activate prompt tone
(Only works while Bluetooth disconnecting)
Disconnect Bluetooth
Reconnect with last device
Play/pause
Check version ID
(Only works while Bluetooth disconnecting)
Answer/end a call
Reject a call
Change the light colors
Enter/ exit TWS mode