DOSS PartyBoom Manual

Also See for PartyBoom:

Table of Contents

Packing content

Input: DC 5V 2A

Capacity: 10400mAh

Charging time: 6 hours

Playtime: Up to 12 hours (at 50% volume)

Bluetooth range: up to 20 m/66 ft

Weight: 4.3 kg/9.4 lbs

Size: 9.9 x 10.9 x 14.0 inches

Warranty: One-year limited

Only one audio source can be played at a time. The priority order is USB > TF order is USB > TF CARD > Bluetooth > AUX IN.
The speaker will auto-off after 30 minutes without audio input. after 30 minutes without audio input.
To avoid sudden loud sound from the speaker, always turn down the volume to minimum level on the Bluetooth device and speaker(s) before playback
Please feel free to contact support team at support@dossav.com if you need if you need any assistance while using this speaker.

Turn on the speaker, press to enter into Bluetooth pairing.
Turn on Bluetooth on your device, and select DOSS PartyBoom in the in the Bluetooth list.
Once paired, will be steady white with a prompt tone.
- When the speaker connects with two devices at the same time via Bluetooth, tracks played from the last connected device.

Turn on the two speakers and long press. on both simultaneously.
The speakers will enter stereo pairing mode, flashes white.
Once paired, the LED display of primary speaker will light in "A", and the secondary speaker will light in "B".
Turn on Bluetooth on your device and select DOSS PartyBoom.
Once paired, on the LED display will light in white.

In TWS mode, if you want to play via PartySync mode, press and hold to exist TWS mode first.
If there are two devices connected to the speaker, long press to disconnect the playing one and enter TWS pairing mode.
In TWS mode, press on both speakers if you want to active the Extra Bass.

Turn on one speaker and get it paired with your device. Then long press to enter the PartySync mode. The speaker will be the primary speaker and light in "A" on the LED display.
Turn on the other speaker(s) and long press to enter the PartySync mode. The speaker(s) will be the secondary speaker(s) and light in "B" on the LED display.

In PartySync mode, if you want to play via TWS mode, press and hold to exist PartySync mode first.
If there are two devices connected to the speaker, long press to disconnect the playing one and enter TWS pairing mode.
In PartySync mode, press on all speakers if you want to active the Extra Bass, and audio control can only be adjusted on the primary speaker.