DOSS SoundBox X Manual

Table of Contents

Packing content

To prolong the lifetime of the battery, fully charge the speaker before the first time using it.
Charging Indicator:
Steady red Charging
No light Fully Charged
The speaker will auto-power off after 15 minutes without audio input.
To remove/activate the auto-power off feature, in Bluetooth disconnect, press and hold the button "+" for 5s (dudu remove; du activate )
To remove/activate all prompt sounds, in Bluetooth disconnect, press and hold the button "—" for 5s (dudu remove; du activate )
If you need any assistance while using this speaker, please feel free to contact customer service at support@dossav.com.

	Press and hold 2s	Turn on/off
	Press and hold 2s	Next track
	Press	Volume up
	Press and hold 5s	Remove/activate auto-power off (Only works while Bluetooth disconnecting)
	Press and hold 2s	Previous track
	Press	Volume down
	Press and hold 5s	Remove/activate prompt tone (Only works while Bluetooth disconnecting)
	Press and hold 3s	Disconnect Bluetooth
	Press	Reconnect with last device
	Press	Play/pause
	Press and hold 5s	Check version ID (Only works while Bluetooth disconnecting)
	Press	Answer/end a call
	Press and hold 2s	Reject a call
	Press	Change the light colors
	Press and hold 2s	Enter/ exit TWS mode

Press to re-enter Bluetooth pairing if your device can't find SoundBox X in 10 seconds.

Turn on both speakers and make sure they're not in the Bluetooth mode.
Press and hold " " button make two speakers enter the TWS mode.
Once the pairing is successful, there will be a prompt tone and their light will be synchronization.

You can connect the Dot to the speaker via Bluetooth.
Please follow the steps to set up via Bluetooth:

Download the Alexa app and follow the steps to set up the procedure to get the Dot connected to your home Wi-Fi network.
Switch the SoundBox X to Bluetooth mode, you can press the power button to re-enter Bluetooth pairing.
Run the Alexa app, tap Menu, and then tap Settings.
Tap the Echo Dot in your list of Alexa devices, then tap Bluetooth.
The SoundBox X should appear in the list of Bluetooth devices. If not, please press the power button and try again.
Once listed, tap on the speaker to complete the pairing process.
To remove the device, return to Bluetooth>tap the name of the speaker>tap "Forget Device"

warning Note: Voice command will not be able to turn on/off the speaker if you connect to it via Bluetooth.