Get Started; Insert The Sim Card And Battery; Remove The Sim Card; Charge The Battery - Nokia 1616 User Manual

Nokia 1616 user guide in english

Hide thumbs Also See for 1616:

Table of Contents

Get started

This phone is intended for use with the BL-5CB battery.

Safe removal. Always switch the device off and disconnect the charger before removing

the battery.

Important: Do not use a mini-UICC SIM card, also known as a micro-SIM card, a micro-

SIM card with an adapter, or a SIM card that has a mini-UICC cutout (see figure) in this

device. A micro-SIM card is smaller than the standard SIM card. This device does not

support the use of micro-SIM cards and use of incompatible SIM cards may damage the

card or the device, and may corrupt data stored on the card.

Place your finger in the recess at the bottom of the device, and carefully lift and

open the back cover (1).

Lift the battery, and remove it (2).

Insert the SIM card (3). Ensure the contact surface area is facing down and the

beveled corner of the SIM card is facing the bottom of the device.

Replace the battery (4) and back cover (5, 6, 7).

Press the release spring (1), and slide out the SIM card (2).

Your battery has been partially charged at the factory. If the device indicates a low

charge, do the following:

Table of Contents