Dexxo Compact io
3
USE AND OPERATION
3.1
Normal Operation
3.1.1
Operation with a 2 or 4-button remote control
Complete opening
Partial opening
Closing
Stop
3.1.2
Obstacle detection mode
• When an obstacle is detected during opening, the door will stop then
close again.
• When an obstacle is detected during closing, the door will stop and
reopen.
When an obstacle has been detected, allow the door to open fully.
Copyright
©
2024 SOMFY ACTIVITES SA. All rights reserved.
3.2
3.2.1
STOP
3.2.2
Cells obscured when opening = the state of the cells is disregarded, and the
door continues to move.
Cells obscured when closing = stop + complete reopening.
3.2.3
The orange light is activated during any gate movement.
3.2.4
Integrated lighting comes on with the motor, and goes out 60 seconds after
the motor has come to a complete stop.
If a remote control is programmed to control the lighting, it operates as fol-
lows:
With a 2- or 4-button remote control
STOP
With a 3-button remote control
3.3
This operation is used to copy the function of a button on a memorised re-
mote control to a button on a new remote control.
Specific modes
Operation with a 3-button remote control
Photoelectric cells operation
Operation with orange flashing light
Integrated lighting operation
Adding a remote control
STOP
2s
EN
9
Need help?
Do you have a question about the Dexxo Compact io and is the answer not in the manual?