Time4Sleep ESSENTIALS Assembly Instructions Manual

Warnings
This product should only be used on a firm and level floor.
Make sure the legs/base always remains in contact with the floor.
Keep small parts out of the reach of children during assembly to prevent choking.
DO NOT
use power tools to construct this product.
DO NOT tighten screws until parts are assembled or as advised in this guide.
DO NOT over tighten screws or bolts.
use this product if parts are missing, damaged or worn.
DO NOT
sit or stand on the product.
DO NOT
Care Information
To clean, wipe with a damp cloth.
Never use scourers, abrasives or chemical cleaners.
Do not use solvent based cleaners or detergents as they can bleach or damage the product.
Parts Identification
2
220922
PLEASE READ this guide prior to installation to familiarise
yourself with the various stages of construction required.
Carefully open the pack and check the contents against the
parts and fittings check list.
Do not destroy any of the packaging until you are certain that
you have all the necessary parts.
Please ensure that the packaging is disposed of in a safe and
environmentally friendly way.
In the unlikely event of missing or damaged parts, please
email customer services: hello@time4sleep.co.uk
Please have this guide close at hand, quoting the part code
reference numbers shown, when requesting spare or
replacement parts.
1
10
9
3
8
7
7
6
4
Page 1 of 19
ESSENTIALS
2 DRAWER BEDSIDE
13
5
11
12
14
15
X2