Download Print this page

Haier C2040 User Manual page 8

User manual

Advertisement

Name
Description
Left soft key
In standby mode, press left soft key to main menu.
Right soft key
In standby mode, press right soft key to Names.
Up key
In standby mode, short press up key to enter TATA Zone menu.
In menus or function options, used to select the upper menu.
In standby status, press down key to enter FM.
Down key
In standby status, long press down key to turn on/off torch.
In menus or function options, used to select the down menu.
Left key
In standby mode, press left key to enter settings menu.
Right key
In standby mode, press right key to enter messages menu.
Send key
Making or answering a call.
In standby mode, press this key to enter the all calls screen.
End (power) key
End calls or reject calls.
Long press: power on, power off.
Number keys
Press to enter number, Long press to speed
Charger connector
Plug the travel adapter into the charger connector.
Headset connector
Before using headset, pull in the headset to this port.
&
Notice:
Long press means pressing key more than or equal to 2 seconds; short press
means pressing key less than 2 seconds.
2
The contact can not get
Please check if your mic is blocked by fittings or
your voice when making
other blocks.
phone call
Receiver sound is
Please check if your receiver volume has been
too low
adjusted to the minimum.
The mobile phone has a
Please check if the phone has a strong signal.
weak receive signal or
If no signal, please use it in a strong signal place.
usually drop in the phone
call
Please check if you are in a weak signal area (in the
The screen displays the
channel or surrounded by buildings), change the area
information such as "No
and retry.
Service" or: Searching..."
Please check if you can try to get the services without
the service provider permission. If needing the service,
please contact the service provider for more information.
15 Safety Information
Electronic Device
Most modern electronic equipment areshielded from radio frequency (RF) signals.
However, certain electronic equipments may not be shielded against the RF
23

Advertisement

loading