RTI ISR-2 Reference Manual page 2

Overview
IR Transmission
Window
WiFi Connection
Indicator
Touchscreen
Display
32 Assignable /
Programmable
Keypad Buttons
Speaker Opening
Powering the ISR-2 On/Off
To Power the ISR-2 on
Press and hold the "Power" button until the ISR-2 powers on (Approximately 2-3 seconds).
or
Place the ISR-2 in the base station - this will automatically power the ISR-2 on. (Base station does not
need to be powered).
NOTE: If the unit does not power on, it may be necessary to charge the battery. See charging information
below.
To power the ISR-2 off
Press and hold the "Power" button, then press the "OK" button for approximately 5 seconds until the ISR-2
powers off.
NOTE: During normal operation, powering the ISR-2 off should not be necessary.
Technical Support: support@rticontrol.com - Customer Service: custserv@rticontrol.com
ISR-2 Front
Ambient Light
Sensor
Battery Charge
Indicator
2 Programmable
Capacitive Buttons
on the Touchscreen
5-Way Joystick
1
3
2
4 5 6
7 9
8
-
0
Charging Contacts
INTELLIGENT SURFACES, ISR-2
Charging Contacts
ISR-SB Charging Base
(included)
2