Advertisement
Industrial Ethernet Switch
User manual
MIEN5208
MIEN5208-2F
1
Packing list
The package of this switch contains the following items. If any item is found
to be missing or damaged, please contact the agent or the customer service
center of maisvch for assistant.
Items
Industrial Ethernet Switch
Power cord
User Manual
2
Product description
This switch is a 100M managed din-raill industrial Ethernet switch.
MIEN5208 provides 8x100M Ethernet RJ45 ports;MIEN5208-2F provides
2x100M fiber ports and 6x100M cRJ45 ports.
Quantity
Remarks
1PCS
AD220 model only
1PCS
1PCS
Advertisement
Table of Contents
Related Manuals for Maisvch MIEN5208
Summary of Contents for Maisvch MIEN5208
- Page 1 AD220 model only Power cord 1PCS User Manual 1PCS Industrial Ethernet Switch Product description User manual This switch is a 100M managed din-raill industrial Ethernet switch. MIEN5208 provides 8x100M Ethernet RJ45 ports;MIEN5208-2F provides 2x100M fiber ports and 6x100M cRJ45 ports. MIEN5208 MIEN5208-2F...
-
Page 2: Interface Description
5.Restore factory settings button 10.Din rail kit Connect the power MIEN5208 series supports DC9-60V DC model and AD220 AC model for selection. For the power input range, please refer to the actual product purchased. DC model: supports dual power redundancy and non-polarity. When any of the power sources is disconnected or fails, the device can still work normally without interruption. - Page 3 normally closed relays. When the switch is working normally, the normally Power 2 Input V2-(AC-N)/Negative (DC) open relay is powered on and closed, and the normally closed relay is opened. When the system loses power or an alarm event triggers an alarm The AC power supply model supports a single power input.
-
Page 4: Hardware Installation
Fiber Port Status LED The port has established a valid network connection Flashing There is network activity on the port No valid network connection is established on the Pin number port Pin definition RJ45 Port Status LED Each RJ45 port has two indicator lights, the yellow light is the port plastic rate Restore factory settings button indicator, the green light is the port connection status indicator. -
Page 5: Device Installation
distance is not less than 5cm. Device connection Connect the network cable to the port in the correct direction. Device installation Tilt the switch upwards so that the upper end of the buckle is fastened to the upper end of the DIN rail. The lower end of the back buckle is buckled into the DIN rail. -
Page 6: Specifications
Specifications Power input MIEN5208-2F MIEN5208 Before connecting the power cord, make sure that the ground is connected. Switch properties Do connect the power cord to the power terminal of the device according to Bandwidth 1.8G the definition. 768Mbit Cache size MAC table 1. - Page 7 The accessories and power supply that come with the product are IEC61000-4- 4(EFT),Level 4 guaranteed for one year. When sending the product back to maisvch for repair, it is recommended Order guide that the customer use the original packaging or the packaging with the...
Need help?
Do you have a question about the MIEN5208 and is the answer not in the manual?
Questions and answers