Page 4
PDP011 - Install Guide In-Ground Mounting Option To In-Ground mount the Dog Park Equipment, start by digging a hole appropriate to the equipment being installed. For most of the Dog Park Equipment, a 12” diameter x 18” deep footing is used. (Some Equipment may specify a different size footing.)
Page 5
PDP011 - Install Guide The Paw Print Step comes fully assembled, but the height can be adjusted. To Adjust the height, use the included Torx head wrench to remove the two bolts and slide the upper portion of the step to the desired height.
Need help?
Do you have a question about the PDP011 and is the answer not in the manual?
Questions and answers