Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Specialized DEMO Enduro 2020
Summary of Contents for Specialized DEMO Enduro 2020
- Page 1 USER MANUAL...
-
Page 3: Table Of Contents
8. SMALL PARTS ........................18 SPECIALIZED BICYCLE COMPONENTS We may occasionally issue updates and addendums to this document. Please periodically check www.specialized.com or contact Rider Care to make sure you have the latest information. 15130 Concord Circle, Morgan Hill, CA 95037 (408) 779-6229 0000140951_UM_R2, 01/21 Info: ridercare@specialized.com / 877-808-8154... -
Page 4: Introduction
GREASE: This symbol means that high quality grease should be applied as illustrated. This user manual is specific to your Specialized Demo bicycle. It contains important safety, performance and technical information, which you should read before your first ride and keep CARBON FRICTION PASTE: This symbol means that carbon friction paste for reference. -
Page 5: General Notes About Assembly
WARNING! Burrs and sharp edges can damage the carbon and alloy surfaces Your Authorized Specialized Retailer may also be able to refer you to classes, clinics or books of the components. Any deep scratches or gouges in the stem or fork can on bicycle use, service, repair, and maintenance. -
Page 6: Bottom Bracket
The Demo is a high performance bicycle. All regular maintenance, troubleshooting, repair cause you to lose control and fall. and parts replacement must be performed by an Authorized Specialized Retailer. For general If the seatpost is cut short, the min/max mark on the seatpost may no longer information regarding maintenance of your bicycle, please refer to the Owner’s Manual. -
Page 7: Specifications
HEAD TUBE ANGLE (°) 62.7 Authorized Specialized Retailer for inspection. BB HEIGHT (mm) WARNING! When placing the frame and/or bicycle in a repair stand, clamp BB DROP (mm) the stand to the seatpost and not the frame. -
Page 8: General Specifications
MIN REAR BRAKE ROTOR SIZE 180mm SEAT COLLAR 4mm HEX WARNING! Specialized frames are compatible ONLY with forks that have a specific 12MM REAR AXLE 6mm HEX 15.0 range of travel. Use of different styled forks or forks with longer travel may result in DERAILLEUR HANGER 2.5mm HEX... -
Page 9: Bearing Specifications
BEARING SPECIFICATIONS SPACER/AXLE/BOLT SPECIFICATIONS QTY PIVOT LOCATION DIMENSION BEARING QTY LOCATION / ITEM DIMENSIONS TOOL TORQUE (in-lbf/Nm) FORWARD SHOCK EYE 15 ID x 24 OD x 5 W 6802V-2RS LOWER LINK SLEEVE 17 ID x 25 OD x 24 W MAIN (Chainstay) 17 ID x 28 OD x 6 W 17286V-2RS... - Page 10 EXPLODED VIEW BEARINGS/SPACERS GREASE GREEN LOCTITE 603 H F U U F H...
- Page 11 EXPLODED VIEW BOLTS/AXLES GREASE BLUE LOCTITE 242...
-
Page 12: Rear Triangle Pivot Assembly
5. REAR TRIANGLE PIVOT ASSEMBLY In order to successfully build the Demo rear triangle, it is very important to follow the order of operations as outlined in this manual. Modifying the order of assembly will result in a longer build process. Grease all bearing surfaces before placing the spacers against the bearings. - Page 13 FORWARD SHOCK EYE CHAINSTAY LOWER LINK G: LINK SLEEVE A: 6802V-2RS B: 17286V-2RS 17 ID x 25 OD x 24 W 15 ID x 24 OD x 5 W 17 ID x 28 OD x 6 W C: 6903V-2RS 17 ID x 30 OD x 7 W D: 15267V-2RS 15 ID x 26 OD x 7 W UPPER LINK...
-
Page 14: Pivot Assembly
Grease, then insert the non-drive side sleeve into the link. 5.2. PIVOT ASSEMBLY „ Grease, then place spacer against the lower link’s drive side bearing. „ Align the link and spacer against the drive side chainstay bearing, then grease and slide the „... - Page 15 2. MID LINK @ LOWER LINK 3. FORWARD SHOCK EYE T: FORWARD SHOCK EYE SPACER 10.1 ID x 15 OD x 4.5 W O: INNER SHOCK SPACER 8.1 ID x 23.5 OD x 6 W M: MID LINK @ LOWER LINK NON-DRIVE SIDE AXLE M8 x 15 OD x 16.5 L Q: MID LINK @ LOWER LINK SPACER...
- Page 16 4. REAR SHOCK X: FORWARD SHOCK EYE BOLT M10 x 15 L P: REAR SHOCK EYE SLEEVE 8.1 ID x 15 OD x 12.5 W W: LOWER/ MID LINK BOLT M8 x 53 L Grease, then insert the mid/lower link bolt through the drive side axle, then thread it into „...
- Page 17 5. UPPER LINK @ SEAT TUBE 6. MID LINK @ UPPER LINK Y: UPPER LINK BOLT M15 x 21 L R: UPPER LINK SPACER 15.1 ID x 27.4 OD x 3 W S: UPPER LINK SPACER 15.1 ID x 23.5 OD x 3 W S: UPPER LINK INNER SPACER 15.1 ID x 23.5 OD x 3 W Q: MID/UPPER LINK INNER SPACER...
- Page 18 7. DROPOUT 8. SEATSTAY @ UPPER LINK AA: SEATSTAY BOLT WASHER 15.5 ID x 24 OD x 0.3 W BB: SEATSTAY BOLT M15 x 35.7 L U: DROPOUT OUTER SPACER 12.1 ID x 20 OD x 2.5 W Z: DROPOUT BOLT M11, 12 OD x 30 L Grease.
- Page 19 TORQUE SPECS Torque each pivot bolt according to the torque spec listed above. „ PIVOT LOCATION in-lbf MAIN 27.1 UPPER LINK @ SEAT TUBE 22.6 SEATSTAY @ UPPER LINK 22.6 DROPOUT (Horst Link) 20.3 FORWARD SHOCK EYE 20.3 LOWER LINK @ MID LINK 22.6...
-
Page 20: Internal Routing
6. INTERNAL ROUTING The housings must be installed without the fork installed in the frame. REAR BRAKE: Starting at the exit port on the inside surface of the non-drive side of the chainstay (Fig.1 „ A), route the housing through the chainstay until it exits the chainstay near the main pivot (Fig.2 B). -
Page 21: Setup Data
7. SETUP DATA 8. SMALL PARTS DATE ITEM DESCRIPTION S192500017 DEMO 29 1.5” HEADSET WITH CUPS, TOP COVER AND COMPRESSION RING RIDER WEIGHT S182500007 HEADSET PRELOAD CAP AND BOLT FORK PSI S170200003 THROUGH AXLE 148MM SPACING, 172MM LENGTH, 12MM FORK REBOUND S194700003 SEATPOST CLAMP - 34.9MM FOR 30.9MM SEATPOSTS (# of clicks from full slow) - Page 24 SPECIALIZED BICYCLE COMPONENTS 15130 Concord Circle, Morgan Hill, CA 95037 (408) 779-6229...
Need help?
Do you have a question about the DEMO Enduro 2020 and is the answer not in the manual?
Questions and answers