Britax ROUNDABOUT 50 CLASSIC User Manual page 29

3 Pull the vehicle belt out and thread it through
the forward-facing belt path to the opposite
side of the seat (Fig. C).
4 Verify that the vehicle belt is not twisted and
buckle (Fig. D).
5 Push the child seat firmly into vehicle seat
while tightening the vehicle belt.
• Ensure the vehicle seat belt system is locked.
6 If the vehicle is equipped with an approved
tether anchor, attach the Versa-Tether
anchor. Remove all slack from tether to secure. Store excess webbing
in the tether pouch. See pages 29 – 32.
7 Verify that the vehicle belt is tight, locked, and that the child seat is
secure.
• The child seat is secure when it cannot be moved front-to-back or side-
to-side more than 1 inch (2.5 cm.) at the belt path. If the child seat is
not secure, repeat the installation process or use an alternate seating
location.
WARNING!
with a two-point Emergency Locking Retractor
(ELR) vehicle belt that does not lock.
Installation: Forward-Facing
Do not use this seat
D
hook to an approved tether
®
27